Page 1 of 1
Pieces of mild steel Gothic plate SOLD
Posted: Mon Sep 26, 2011 3:03 pm
by Vitus von Atzinger
This is a set of Gothic plate pieces made by MacKenzie-Smith about 15 years ago. They will fit a medium-sized person.
Set includes vambraces, rerebraces and quisses. They need cleaning and one of the cuisses needs some re-shaping.
But hey, you won't have to do all that fluting to get some Gothic armour.
All the pieces sold as a set.
$60 plus shipping paid by you.
First pic are the vanbraces and rerebraces.
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 3:03 pm
by Vitus von Atzinger
These are the cuisses.
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 3:04 pm
by Vitus von Atzinger
Another shot of the rerebraces.
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 4:29 pm
by GunnarUlfson
Dibs - can I get measurements on the vambraces? Length and circumference at the largest spot of the forearm?
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 5:42 pm
by Vitus von Atzinger
Forthcoming.
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 7:03 pm
by Vitus von Atzinger
The bottom plate of the vambrace is 7 1/2" long. I measured across the widest part of the opening (with the top plate locked in place) and that measurement was 4 3/4" across. This was not the part where the wrist meets the hand, but across the place where the fat part of the forearm is near the elbow cop. I don't have a tailor's tape so couldn't take a circumference.
Re: Pieces of mild steel Gothic plate FS
Posted: Mon Sep 26, 2011 8:53 pm
by GunnarUlfson
I will take them. Paypal okay? I will PM you my address for the shipping cost.