The Armour Archive

have been asked to get a price for some spring steel strip about 3mm thick ( 1/8 aprox ) and have found a supplier but the quantity required is small so to get the price a bit better I thought I would ask if others in England need any.
this is plate and will be lasercut so can be shaped or just plain strips in any width and up to 2.5m ( 8' ) long.

if there is interest I could get other thicknesses in.
at the moment I have a source but no price and could get either hardened and tempered or annealed.
I could also get 16 gauge in the future but will wait to see what happens here first.

please PM me if interested.

if its EN45 I might be interested in a bit, though I could really prefer 5 and 8mm (3/16th and 1/4+) for that.
3mm in plain carbon spring stuffs, I'd likely only use some smaller volumes for doing non-military knives etc.