So after I was literally knocked out of the last Crown tourney I fought in, it was deemed that I needed a new helm. So I am looking for someone willing to either sell a Japanese helm/willing to take a commission/who knows someone I could contact for a the same.
Ideally the helmet will:
Keep me from getting concussed
I have been using a Stainless padded mask with the old helm and I would like to be able to continue using that.
Will be appropriate for a 16th century Mid-ranked Samaurai
Will be under $1,000
Kita Jiru Toramasa
ISO Japanese helmet
-
Caius705
- Archive Member
- Posts: 2449
- Joined: Wed Aug 01, 2012 4:42 pm
- Location: Barony of Bordermarch, Ansteorra
Re: ISO Japanese helmet
I've never bought one, but I do know that Clang carries several. I'd talk to him.
"This quote was enough reason on its own to join AA. Period."
-Scott Landua
-Scott Landua
-
liguangming
- Archive Member
- Posts: 108
- Joined: Mon Sep 11, 2006 5:58 pm
- Location: Duke City, NM
- Contact:
Re: ISO Japanese helmet
Reach out to Brennainn here on AA. He makes a solid Zunari.
Li Guang Ming
Li Guang Ming
Go forth and show them your influence.
Li Guang Ming
Li Guang Ming
-
Frederick de Fulbert
- Archive Member
- Posts: 151
- Joined: Sun Jun 05, 2005 1:24 am
- Location: Albertville MN.
Re: ISO Japanese helmet
Toramassa San! Good to see you here. I would Second Clang. He does some very nice work.
Fro
Fro
Baron Frederick de Fulbert "Froberry" OL
"Whats your excuse, Your an Armourer"
"Whats your excuse, Your an Armourer"
-
Caius705
- Archive Member
- Posts: 2449
- Joined: Wed Aug 01, 2012 4:42 pm
- Location: Barony of Bordermarch, Ansteorra
Re: ISO Japanese helmet
Not familiar enough with nipponese armor to know time periods. These are the two he has listed on his site. Think he has a few more on his Facebook.
http://clang.adkinssoftware.com/helm%20 ... %2001.html
http://clang.adkinssoftware.com/helm%20 ... %2001.html
http://clang.adkinssoftware.com/helm%20 ... %2001.html
http://clang.adkinssoftware.com/helm%20 ... %2001.html
"This quote was enough reason on its own to join AA. Period."
-Scott Landua
-Scott Landua
-
liguangming
- Archive Member
- Posts: 108
- Joined: Mon Sep 11, 2006 5:58 pm
- Location: Duke City, NM
- Contact:
Re: ISO Japanese helmet
Is Clang actually still making these? There are several on the Tousando board who have been advised he is not, but he is sharing the pattern with them.
Li Guang Ming
Li Guang Ming
Go forth and show them your influence.
Li Guang Ming
Li Guang Ming
-
Caius705
- Archive Member
- Posts: 2449
- Joined: Wed Aug 01, 2012 4:42 pm
- Location: Barony of Bordermarch, Ansteorra
Re: ISO Japanese helmet
His website does say he isn't accepting custom orders (didn't notice that till just now) but I'd ask him personally. When I bought something from his, he was pretty quick about answering.liguangming wrote:Is Clang actually still making these? There are several on the Tousando board who have been advised he is not, but he is sharing the pattern with them.
Li Guang Ming
"This quote was enough reason on its own to join AA. Period."
-Scott Landua
-Scott Landua
-
Yojimbo
- Archive Member
- Posts: 1962
- Joined: Mon Aug 23, 2004 3:24 pm
- Location: 1/2 past a monkeys ass, 1/4 to his balls
Re: ISO Japanese helmet
I think Clangs backlog is pretty full.
Two ravens armory and shamrock make good kabutos.
Two ravens armory and shamrock make good kabutos.
Never Trust a Fart.
-
Ulricus von Geusa
- Archive Member
- Posts: 164
- Joined: Tue Aug 23, 2011 8:39 am
- Location: The Kingdom of Ealdormere
Re: ISO Japanese helmet
Yeah, I just emailed CLANG last week about a helm project and he said he's pretty full and it would likely be the spring before he could get to anything new.
Last edited by Ulricus von Geusa on Thu Nov 01, 2012 5:30 pm, edited 1 time in total.
"Fairy tales are more than true; not because they tell us that dragons exist, but because they tell us that dragons can be beaten." - G.K. Chesterton
-
TaliesonTegwas
- Archive Member
- Posts: 132
- Joined: Fri Jun 22, 2012 5:22 am
- Location: Portland OR/Barony of Three Mountains An Tir
Re: ISO Japanese helmet
Never worked with him but two raven's look really nice and reasonably priced.
http://www.tworavensarmoury.com/
http://www.tworavensarmoury.com/
Lord Talieson Tegwas Squire to Duke Amalric Blackhart
"The heights by great men reached and kept, were not obtained by sudden flight. But they, while their companions slept, were toiling upward in the night." - Henry Wadsworth Longfellow
"The heights by great men reached and kept, were not obtained by sudden flight. But they, while their companions slept, were toiling upward in the night." - Henry Wadsworth Longfellow
-
Sigvat Odvarsson
- Archive Member
- Posts: 161
- Joined: Fri Jul 06, 2012 8:16 pm
Re: ISO Japanese helmet
This thread just got started as well. May want to check them out.
viewtopic.php?f=3&t=155735
viewtopic.php?f=3&t=155735
Sigvat Odvarsson
House Golden Boar
House Golden Boar
-
mitsuhide
- Archive Member
- Posts: 75
- Joined: Sun Sep 21, 2008 10:34 pm
- Location: Barony of 1000 Eyes, Artemisia
Re: ISO Japanese helmet
Shamrock made mine and I love it, damn things a tank.
The strongest among you may not wear a crown.
-
shamrockarmoury
- Archive Member
- Posts: 1282
- Joined: Thu Dec 01, 2005 7:54 am
Re: ISO Japanese helmet
mitsuhide wrote:Shamrock made mine and I love it, damn things a tank.
This one
I can't beleave you did not send me this picture because it is a good one to add to the work I have done with people in there kits for the website when it is updated.Cheers
Jackie
- Attachments
-
- meatharvest2.jpg (93.79 KiB) Viewed 7 times
-
Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
Re: ISO Japanese helmet
PM Sent
William S. Giltner
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft