The Armour Archive

Posted: **Tue Aug 19, 2003 11:54 am**

I am seriously looking at putting togather an order. I have none of the deatils worked out at this time but am trying to get a feel for the interest out there. Any body interested?

I was around for the last rip off so i don't need any reminders. And i dont plan on moving any time soon. I think i would be able to front the bulk of the money but may need some help in get getting the order up to reasonable number.

Posted: **Tue Aug 19, 2003 5:00 pm**

I would probably be interested in between 1,000-1,200 plates. If we can get a large enough order together hopefully we can keep the cost per plate down.

Why dont you cross post this on the A&D board, and maybe the OT also to get maximum visibility.

[This message has been edited by warclub_33 (edited 08-19-2003).]

Posted: **Tue Aug 19, 2003 8:13 pm**

depending on price, 1200-2k

Posted: **Wed Aug 20, 2003 12:50 pm**

When we did the Archive order, I believe I paid $.35 for aluminum and $.27 for stainless steel. If you can get the aluminum down to 35-40 cents a plate, I'd be in as well (depending on what sort of aluminum you end up ordering). Not much though, perhaps 400 plates.

~Wil

Posted: **Wed Aug 20, 2003 1:29 pm**

I might go in for enough for 1 suit (400?)

Posted: **Wed Aug 20, 2003 3:33 pm**

http://home.armourarchive.org/members/brodir/images/misc/Brodir.jpg

These are my old aluminum plates... 6'1, 48" chest, and I used 321 plates in that suit. Just to give an idea, most folks will need between 300-400 for a short corselet.

Also note the unorthodox lacing pattern... more overlap makes for better protection and longer plate life!

~Wil

Posted: **Wed Aug 20, 2003 10:46 pm**

Ok.. Well I'm 6' also with 48" so 400 should do me fine then?

Posted: **Thu Aug 21, 2003 6:40 pm**

I have been busy but am still interested in pursuing this. Just wanted to touch base so ya'll didn't start to womder whats going on

Posted: **Thu Aug 21, 2003 7:29 pm**

I am still in too, if we can get a big enough order together, but the way it looks, there isnt as much interest as I had hoped there would be.

Posted: **Sat Aug 23, 2003 11:09 pm**

I would be interested in 500 aluminum plates

[This message has been edited by Baldewyne (edited 08-23-2003).]

Posted: **Mon Aug 25, 2003 9:08 am**

I have talked to Carolina stamping. In interest of moving forward with this endevor i will be cross posting this to the all the archive sections. If you want in on the initial order it will be a bit cheaper per plate but i have comited to make the order happen so if we are a little short i will trying to make up the short fall. As of this posting i don't have pricing but it should be in today and i'll get out asap.

Posted: **Mon Aug 25, 2003 10:14 am**

I'm definately doing a lamellar in teh near future, so I'm very interested in this.

Chris

Posted: **Mon Aug 25, 2003 8:40 pm**

Ok - pre order pricing- $0.36 per plate.
T6 16 ga (.063in) Aluminum. I want to place the order on friday 8/29 with a drop dead date of the following monday. Cash check or pay pal. Send me an email off list, adress in profile and i'll send you my address. Pay pal to the address in profile. Shipping will be extra and will be real shipping, this isnt ebay! I have talked to my lady and i will be coving the short fall and selling the rest at a mark up. If you want cheap speak up and be ready to put your money....
Turn around will be 2-3 weeks after order is placed to get the stuff to me and a couple of days to get it you.
If there is enough interest the price will go down on the pre order.

Please reference the arcive or birka or somthing in your email subject so it wont be confused with the rest of the spam i get that gets deleted.

[This message has been edited by adric (edited 08-25-2003).]

Posted: **Tue Aug 26, 2003 1:10 pm**

I'm jumping on the bandwagon also. Just gathering up a few orders on this end, hopfully will put us over the edge for a price reduction.

Saranac Goetz

Posted: **Tue Aug 26, 2003 4:06 pm**

16ga will just dent get 14ga it won't

Posted: **Tue Aug 26, 2003 4:43 pm**

Greetings,

The SS plates that GAA and WMA are selling are 20ga and they also dent. Nothing a rubber mallet doesn't take out. On the overlap your looking at aproximatly 11ga.

Saranac Goetz

Posted: **Tue Aug 26, 2003 9:46 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by Tarquin Bjornsson:
16ga will just dent get 14ga it won't<HR></BLOCKQUOTE>

NO! well, mabey. I have been fighting in my vest in the same plates from an earlier order and still no dents. Thats pratice every week, some times 2, gulf war last year and several event since. i'm sure under right instances it could get dented but not so far.

Posted: **Tue Aug 26, 2003 9:49 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by Depths_of_Mind:
I'm jumping on the bandwagon also. Just gathering up a few orders on this end, hopfully will put us over the edge for a price reduction.

Saranac Goetz<HR></BLOCKQUOTE>

To make that happen i need to be able to justify to my wife why i'm ordering 10000 instaed of 5000. So any thing ya'll do will help!

Posted: **Wed Aug 27, 2003 4:20 am**

Umm, yea. Not looking at 5000 plates to order. Was a thought.

Saranac Goetz

Posted: **Wed Aug 27, 2003 6:28 am**

Adric, did you recieve my email?

Posted: **Wed Aug 27, 2003 3:33 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by warclub_33:
Adric, did you recieve my email?<HR></BLOCKQUOTE>

No but i am sending you one off list so you should have a clear return path.

Posted: **Wed Aug 27, 2003 3:40 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by Depths_of_Mind:
Umm, yea. Not looking at 5000 plates to order. Was a thought.

Saranac Goetz<HR></BLOCKQUOTE>

If we as a group can get to 5000 with out the 1000 i want i will most likely buy the 10000 anyway as it will actually save me money.

Posted: **Wed Aug 27, 2003 4:07 pm**

I want to get into this, I really am interested, but....The last archive birka plate group order involved several people paying their up-front money to the person doing the order, who promptly vanished. Everyone lost their money.

Have you any safeguards in place to insure a repeat doesn't happen?

Damn, I hate even bringing this up because it sounds like I'm calling you a thief. I'm not, that's not what I mean at all, but I'm gun-shy.

Posted: **Wed Aug 27, 2003 4:25 pm**

You know, when we did the initial aluminum order, we went with a 12 gauge (IIRC), and it still dented under extreme abuse. 16 gauge will require quite a bit of maintenance, in my mind.

I'd be happier if we were going with a thicker gauge. This isn't a breastplate, hammering one or two dented plates requires unlacing, which is an utter pain.

If everyone else is happy with 16 gauge I'm still in, but thicker would be better. Weight isn't a concern, after all!

~Wil

Posted: **Wed Aug 27, 2003 4:48 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by Konall:
I want to get into this, I really am interested, but....The last archive birka plate group order involved several people paying their up-front money to the person doing the order, who promptly vanished. Everyone lost their money.

Have you any safeguards in place to insure a repeat doesn't happen?

Damn, I hate even bringing this up because it sounds like I'm calling you a thief. I'm not, that's not what I mean at all, but I'm gun-shy.<HR></BLOCKQUOTE>

I gave it a lot of thought but this seems to be the best way for me not to front the whole gig and still make it happen. if you would rather wait i will have extra and they will go here and on ebay but i will want more for them. If you want to ensure not getting riped off use pay pal and put it on a card. You can dipute the charges up to 60 days out. Other than that i dn't see a way to not put folk in the same position. if you want to resaerch me i come up with a work contact info at google, a member since like 2000 with pay pal and a 47 ebay rating last i checked. that aside i'm up for other options...

Posted: **Thu Aug 28, 2003 1:08 am**

<BLOCKQUOTE>quote:<HR>Originally posted by adric:
If you want to ensure not getting riped off use pay pal and put it on a card. You can dipute the charges up to 60 days out.<HR></BLOCKQUOTE>I have no idea where you came up with this, but it is completely wrong.

Or rather, sure you can dispute the charges with your credit card company if someone cheats you via PayPal, but they (the card co) will not rule in your favor. As far as the credit card company is concerned, you completed a valid transaction with PayPal and everything is as it should be. What happened after that is between yourself, PayPal, and the 3rd party, but has nothing to do with the card company. As such, they usually won't refund your money. If you happen to get lucky and the card company does do a chargeback, PayPal will immediately lock your account--and keep any money you have with them.

Perhaps you are thinking of PayPal's dispute process. In that case, you only have 30 days to file. In addition, PayPal will only refund your money if they can recover the funds. If they can't, you get nothing. They even have "fund recovery is not guaranteed" in several places on their website.

Other than that i dn't see a way to not put folk in the same position. 

Yeah, that's the problem I see too.

if you want to resaerch me i come up with a work contact info at google, a member since like 2000 with pay pal and a 47 ebay rating last i checked. 

<ol>[*]Ebay: Yep, 52 positives since May 2000, 0 neg or neutral. On the downside, however, only 5 in the last 6 months, and only 1 of those as a seller. </li> [*]PayPal: Yep, April 2000, 17 verified buyers.</li>[/list]

that aside i'm up for other options...

I don't really have any. An escrow service would add enough to the price to make it not worth it. The only other thing I can come up with is I could hijack the order and front the whole thing...~$1800 for 5000 plates. Can't say I much like that idea.

Actually, you look like a much safer bet than many of the people I've sent money to. It's just that I've been screwed twice by archivers (well, once--I eventually got my money back from Armour Guy) and I'm a little paranoid.

[Edited for UBB code. Oh yeah, I intend to jump in for around 300 plates. I don't know the exact number yet, I need to take some measurements.]

[This message has been edited by Konall (edited 08-28-2003).]

Posted: **Thu Aug 28, 2003 5:23 am**

Sorry on the 60 day thing i wasn't thinking! credit card co's give you 60 days to dispute charges and i was no braining it and forgetting that pay pal was paid imedately and there fore your done with that line of thought. I just got done working about 12 hrs and brain went soft! Soorrry!

Posted: **Thu Aug 28, 2003 5:51 am**

Adric,

I will get you information soon, you said drop dead date is Monday? I have a few intereseted that I'll be seeing this weekend. Will get you the information by monday. I'm looking at minimum 400 though myself.

Saranac Goetz

Posted: **Thu Aug 28, 2003 7:11 pm**

Any chance on getting a picture of these plates? I'm still real impressed by the noble plastics lamellar but I'm always looking at options. I saw the couple of armorers that offer them in stainless, but the lamellar is just wrong for what I'm trying to do.
Thanks,

------------------
Animal Weretiger

Posted: **Thu Aug 28, 2003 7:17 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by Animal:
Any chance on getting a picture of these plates? I'm still real impressed by the noble plastics lamellar but I'm always looking at options. I saw the couple of armorers that offer them in stainless, but the lamellar is just wrong for what I'm trying to do.
Thanks,

<HR></BLOCKQUOTE>

Massa G's die so if you look on the GAA site its the same shape size hole pattern every thing but in aluminum.

Posted: **Thu Aug 28, 2003 10:02 pm**

Ok, thanks. Wrong stuff for me. I need the 7 hole stuff. THanks anyway fellas

------------------
Animal Weretiger

Posted: **Thu Aug 28, 2003 11:40 pm**

<BLOCKQUOTE>quote:<HR>Originally posted by adric:
Massa G's die so if you look on the GAA site its the same shape size hole pattern every thing but in aluminum.<HR></BLOCKQUOTE>

Not Massa G's die. It is a die that was purchased through a group order. Cannot rembmer the actual name of the owner on the die.... would need to look it up, it is around here somewhere.

Anyone can use it. I believe it is a group ownd die having been paid for out of a group order.

Massa G and I simply go on a spending spree and bu at low cost then resell. Beats the heck out of waiting for a preorder that may be a hassle.

Posted: **Fri Aug 29, 2003 3:31 am**

LOL. Easy, calm down, inhale, take a deep breath.

Saranac Goetz

Posted: **Fri Aug 29, 2003 11:52 am**

<BLOCKQUOTE>quote:<HR>Originally posted by adric:
Damn you folks spend so much time nit picking shit its amazing any thing gets done at all. <HR></BLOCKQUOTE> Huh! I guess you're right. I think I'll pass on this order, thanks anyway.

Posted: **Fri Aug 29, 2003 12:05 pm**

crap, Crap, CRAP..

Usually these things take a bit more time. I won't have the money to do this for another two weeks.

I'm truely sorry.. Hopefully it won't be too expensive on the after pre-order run and I can get in on that.

The Armour Archive

Aluminum birka plate order

Aluminum birka plate order