Page 1 of 1
Looking to commision Full suit.
Posted: Tue Sep 30, 2003 8:20 am
by Bryndon Starfall
I do live steel armor combat demonstrations and shows for Renn Faires and conventions. As a member of autumn tree armored company I am in need of a new kit from Helm to Sabbatons. I would like to work with a local armorsmith so that we can do sizing but I'm willing to entertain other ideas with some really good feed back from past customers. I am also looking for a new gambeson. please feel free to contact me at
bjboucher@juno.com. I would like to work with a New England Armorsmith for sizing reasons.
Posted: Tue Sep 30, 2003 8:41 am
by Morgan
how much you got to spend?
http://www.lightlink.com/armory/not quite new england, but hey....he's the best.
Posted: Tue Sep 30, 2003 9:27 am
by James B.
Morgan is right Robert MacPherson is as good as it gets
. Jeff at Historic Enterprises is good to
http://www.historicenterprises.comEven if he is not who you go with I suggest getting spring steel armor, it is far more dent resistant and that is important for steel fighting.
Flonzy
------------------
Cheap garb is as bad as plastic armor.
http://home.armourarchive.org/members/flonzy
Posted: Tue Sep 30, 2003 9:53 am
by Bryndon Starfall
I have sent Robert an email, thanks for the help...though to be honest it might be ALOT more then I'm looking to spend.
I always intended to get spring steel...I should have mentioned that above.
Posted: Tue Sep 30, 2003 10:09 am
by Stephen
http://www.bestarmour.com/ they are in the cech republic I believe but I have heard many good things and seen thier work and have to say with the exchange rate it is a very reasonable price. They seem to do alot of authentic work as well. They are very particular about sizing as well. One of the members who posts here told me they asked him to measure the parts they requested with a caliper to make sure as possible of the sizing since they are so far away. I think that says alot when an arnouer is will to put his work to that kind of sizing conditions. Warren at hoseki leather who posts here had armour made from him. shoot him an email for pics.
Posted: Tue Sep 30, 2003 10:40 am
by Morgan
Yes, MacPherson is more than most of us can spend, but you didn't specify.
Patrick Thaden can probably do you as well, but he's in Texas.
http://www.thadenarmory.com
Posted: Tue Sep 30, 2003 11:05 am
by Steve S.
Another armourer to consider is Tom Justus.
Steve
------------------
Forth ArmouryHighly authentic, affordable riveted maille.
Posted: Tue Sep 30, 2003 3:57 pm
by Otter
..Oh the journey begins.....
------------------
Cry HAVOC !!!, And let slip the MUSTELIDS of WAR !!
Posted: Tue Sep 30, 2003 6:25 pm
by Laz
And you can tell us how to get ahold of Tom Justice?
I saw a coppergate someone told me he did. I would love to see it again.
Lodinn
Posted: Tue Sep 30, 2003 10:37 pm
by Steve S.
Both he and his apprentice (GeneP) post here frequently.
Steve
------------------
Forth ArmouryHighly authentic, affordable riveted maille.
Posted: Wed Oct 01, 2003 7:19 am
by Bryndon Starfall
If either of them could leave a contact or shoot me an email that would be great!
Posted: Wed Oct 01, 2003 7:41 am
by GeneP
Hi Bryndon. Yep I am Toms apprentice. Just saw this post and will pass along to Tom this afternoon. He also has pics of the coppergate helm he made will see if I can get him to post one for you guys
GeneP
Posted: Wed Oct 01, 2003 5:30 pm
by knuut
If safety is also an issue, I can do gussets, voiders and all the other little flexable bits in very light welded spring stainless chainmail.
------------------
knuut@weldedchainmail.com
Posted: Wed Oct 01, 2003 8:42 pm
by Edric
I also would recommend Patrick Thaden. He is one of the best up and coming armourers in the US and I know of know one who would say otherwise.
I personally have purchased a visor from him and he is currently working on a milanese leg harness for me.
His eye for details and craftsmanship are outstanding. Here are some pics he took of my legs in progress.
http://thadenarmory.com/customers/edric/leg01.jpghttp://thadenarmory.com/customers/edric/leg02.jpghttp://thadenarmory.com/customers/edric/leg03.jpghttp://thadenarmory.com/customers/edric/leg04.jpgHis website DOES NOT show the quality of his work. I believe all of the pictures he has there are several years old.
I would email him and discuss your project with him
patrick_thaden@hotmail.com . I know he is getting married in a couple of weeks so the quicker the better. Normally his communication is second to none but I know he is probably going to be on his honeymoon until the end of October.
------------------
--Edric de Aldebury--
edric@edricsrose.com http://www.edricsrose.comFlos est puellarum, quam diligio, et rosa rosarum, quam sepe video.
"My love is a flower among virgins, and a rose among roses"
