Ti Coat of Plates
Posted: Tue Nov 18, 2003 12:09 pm
I have two Ti coats of plates kits ready. It is just the plates cut out and debured. The front body plates are curved but the side plates have not been because of differing body sizes. The CoP's are of wisby type 7 design. 2 large body pieces, 3 chest pieces and 4 side plates.
More plates can be puchased if they are needed. Spine plates can also be bought and are not included because of the lack of them in the original design. Simple hole designs can also be punched for an additional price.
The total for the 9 plates comes to $80 Additional side plates are $20 for 2. Spine plates depend on the style and how much material (the most expensive part) it takes. The basic kit fits a person with a waist of about 40" and 2 side plates adds ~12 inches.
If you would like a coat of plates in a different style email me. I will have pics later today.
More plates can be puchased if they are needed. Spine plates can also be bought and are not included because of the lack of them in the original design. Simple hole designs can also be punched for an additional price.
The total for the 9 plates comes to $80 Additional side plates are $20 for 2. Spine plates depend on the style and how much material (the most expensive part) it takes. The basic kit fits a person with a waist of about 40" and 2 side plates adds ~12 inches.
If you would like a coat of plates in a different style email me. I will have pics later today.
