The Armour Archive

3 pairs of elbows. 16g cr mild steel. 2 peice welded cop.

From left to right, fanless cop with slight point, small rondel with slight point, and large rondel with no point.

[img]http://www.whitebatarmory.com/avail/elbo00102.jpg[/img]
http://www.whitebatarmory.com/avail/elbo00101.jpg
http://www.whitebatarmory.com/avail/elbo00102.jpg

Asking $20.00 for the fanless, and $25.00 for either of the rondels. Rivets are not set in the rondels so that you can strap them. I can put in either 3/16" brass or copper rivets, or enlarge the hole and put in a 7/32" steel rivet. Rondels are welded securely on the edge of the cop. While only one of each is pictured, they all have a matching 'mate'.

Size is a med-lg. They measure about 5" across. Can be adjusted somewhat.

Also...

1 pair flared knees. 16g cr mild steel. 2 peice welded construction.

[img]http://www.whitebatarmory.com/avail/knee00101.jpg[/img]
http://www.whitebatarmory.com/avail/knee00101.jpg
http://www.whitebatarmory.com/avail/knee00102.jpg

No holes or straps as such. Would like to see $35.00 for these. Also a Med-lg, measure about 6.25" (oops!) side to side.

Shipping and handling on any single pair to continental US will be $10.00.

Not even a nibble?

bump for the weekend.

Hi,

How wide are the knees across?

Steve

Steve,

Good to 'see' you around again!

They're about 6.25" across at the widest point on the inside. I'm glad you asked because I went and measured again, and originaly had it wrong.

I'm about as 'medium' as a man can be, and I would want them just a fuzz narrower for me. My legs are a little skinnier than the rest of me though.

I could adjust them SOME (maybe as much as a half inch either way) but the flare makes that wicked tough.

Knees and small rondel elbows spoken for, pending payments.

Regarding the fanless cops.

They are basicly identical to the small rondels, they just don't have the rondels put on.

I would be willing to add a rondel to them (large or small) or another style fan for $5-10 (or more) dependant on the complexity of design.