The Armour Archive

Posted: **Sat Mar 03, 2007 10:17 am**

These are 16ga 304 stainless shield bosses.
Outside diameter ~8 inches
inside diameter 6 inches
they are about 2.5 inches deep
they have 6 3/16 holes drilled for mounting.

I am selling them for 45.00 delivered in the Con U.S.

Thanks for looking

Edit to change pics.

The pic looks like the boss is closer to 3 in deep but in reality it is about 2.5

Posted: **Sun Mar 04, 2007 7:11 am**

How much do they weigh?

Posted: **Sun Mar 04, 2007 3:14 pm**

stand by.
the weight is just over 1lb.

Posted: **Sun Mar 04, 2007 11:33 pm**

Put me down for one ... PM me with how & where you'd like payment. I do have paypal account.

Posted: **Sun Mar 04, 2007 11:56 pm**

I may have to get in on this, too. Let me check to see if my gauntlets are likely to work. I've heard a nasty rumor that EGGs need 7" inner diameter.

Posted: **Mon Mar 05, 2007 7:48 am**

PMs sent

Posted: **Tue Mar 06, 2007 3:32 pm**

Bump to keep it on the 1st page.

Ian, yours is in the mail!

Posted: **Mon Mar 12, 2007 9:30 am**

I still have a few if anyone is interested.

Posted: **Tue Mar 13, 2007 9:47 am**

Got mine last week. Posting quick review ...

Great communications and speedy shipment. Boss exactly as described. Dishing is smooth and polish good. Clean holes and lines. Is just the right depth for me (I prefer using finger/demi gauntlets vs. hockey gloves). Well worth the price for quality and service.

Posted: **Tue Mar 20, 2007 10:25 pm**

folks are asking so here is a bump!

Posted: **Tue Mar 20, 2007 11:16 pm**

Ceddie, what size hole would you need to make in the center of the shield for the boss? I have BMHD cutting a shield in the next few days and need to give him a measurement, thanks.

Posted: **Wed Mar 21, 2007 7:47 am**

e-mail sent

Posted: **Wed Mar 21, 2007 9:06 am**

also interested, I have the same gauntlets Iain does so if this works for him it should for me

shoot me a message how to send you cash, I prefer paypal so let me know it's that's alright with you

Will

Posted: **Wed Mar 21, 2007 9:18 am**

PM sent

Posted: **Wed Mar 21, 2007 6:47 pm**

People, these are really nice bosses. Light, well shaped, smooth finish. I highky recommend Ceddie, he's a great guy to deal with.

Posted: **Wed Mar 21, 2007 6:55 pm**

The photo looks like its a spun boss. Is that correct?

Posted: **Wed Mar 21, 2007 7:49 pm**

I was told they were pressed on a 40 ton hydraulic press.
In any case, they mike out at 1.4mm at the edge.

Posted: **Thu Mar 22, 2007 10:26 pm**

Ceddie

just got back from the post office, check went out tonight.

Will

Posted: **Fri Mar 23, 2007 7:32 am**

Ceddie wrote:I was told they were pressed on a 40 ton hydraulic press.
In any case, they mike out at 1.4mm at the edge.

I just talked with my supplier, these ARE spun, I spoke in error.

but the thickness is the same.

Will, your boss went outThurs morning.

Posted: **Fri Mar 23, 2007 11:30 am**

Ceddie,

Eh, who can resist? I'm interested in a boss. Let me know how you want payment.

Thanks,

Posted: **Fri Mar 23, 2007 11:39 am**

E-mail sent

Posted: **Tue Mar 27, 2007 5:35 pm**

Bosses are good stuff, folks, solid and light -- not to mention Ceddie sent it off and it was delivered BEFORE I was even able to send out payment! Thanks Ceddie, I look forward to doing more business with you in the future.

Posted: **Thu Apr 05, 2007 5:01 pm**

Posted: **Fri Apr 06, 2007 9:12 pm**

Do you have any side pics??

Uric

Posted: **Fri Apr 06, 2007 11:10 pm**

I'll pop some and post them in the morning.

Posted: **Mon Apr 09, 2007 8:39 pm**

just want to throw my two cents in

great product for the price and couldn't be happier with the service

if you need a boss grab one now before he sells out!

Will

Posted: **Mon Apr 09, 2007 9:30 pm**

What WFM said. these are super nice, clean lines, very nice and a good price. Ceddie's also a great guy to work with.

Posted: **Fri Apr 13, 2007 1:25 pm**

Got mine in today, and am very pleased. Very light and smooth.

Uric

Posted: **Fri Apr 13, 2007 2:17 pm**

Ceddie can you make smaller bosses too like the norman kite sized ones?

Posted: **Fri Apr 13, 2007 2:50 pm**

ingolf wrote:Ceddie can you make smaller bosses too like the norman kite sized ones?

pm sent.

Posted: **Fri Apr 13, 2007 3:47 pm**

I have one of these and am very pleased with it. Strong, smooth and light. Dimensions are a good fit for my hand size (L/XL).

Posted: **Fri Apr 20, 2007 7:28 pm**

I have bought one of these as well and it has taken a beating and not a single dent. love this centerboss

The Armour Archive

stainless shield bosses: updated pics!

stainless shield bosses: updated pics!

Smaller Bosses

Re: Smaller Bosses