Page 1 of 1
For Sale: MS Greaves (rough)
Posted: Wed Apr 02, 2008 10:26 pm
by Chazz
These are a pair of Mild steel 18 ga greaves. I've just never gotten around to finish. I'd like to get $55 for them. Grind, polish, strap and they are ready to go.
http://farm3.static.flickr.com/2236/211 ... =05764705/
Email any questions to my personal email (
sirtighearnain@gmail.com)
Thanks
Chazz
Posted: Wed Apr 02, 2008 10:29 pm
by Oswyn_de_Wulferton
Title and pic are of greaves, but post refers to gauntlets
Posted: Wed Apr 02, 2008 10:31 pm
by Chazz
fixed
Re: For Sale: MS Greaves (rough)
Posted: Wed Apr 02, 2008 10:35 pm
by Oswyn_de_Wulferton
Edited due to fix.
Posted: Wed Apr 02, 2008 11:27 pm
by Gethin
Could you please post some measurements?
Posted: Thu Apr 03, 2008 8:17 am
by Chazz
Down the center from the top to the top of the yoke (where your foot would go) is 11 1/2 inches
At the widest point they are 6 1/8 inches
Posted: Thu Apr 03, 2008 7:07 pm
by Klaus the Red
Withdrawn- I just measured my old ones (which are too short on me) and they're about the same length.
Klaus
