Greathelm Mantle, construction advice?
Greathelm Mantle, construction advice?
I'm not entirely certain if that's what it's called, however, I've seen many pictures of what looks like a cloth doughnut on top of a Pembroke style of helm which has streamers etc/ hanging from the back.
(I don't however, need the sculpture that goes on top of it, I don't want to charge into battle looking like a demented Carmen Miranda with fruit on my head, or an sitting bird or whatnot)
I think they look neat, and I want one for my own helm, but I can't figure out quite how to make one that would either stand up to combat abuse, or be sufficiently easy/cheap to replace that I can afford to make them last only 1 fight. they clearly seem to have some underlying structure under the cloth wrap, and I haven't been able to find anything that states what it was made from.
This may not be the correct forum for this, being a purely decorative aspect of armoring. I couldn't decide if this should go into this forum, or the research forum.
(I don't however, need the sculpture that goes on top of it, I don't want to charge into battle looking like a demented Carmen Miranda with fruit on my head, or an sitting bird or whatnot)
I think they look neat, and I want one for my own helm, but I can't figure out quite how to make one that would either stand up to combat abuse, or be sufficiently easy/cheap to replace that I can afford to make them last only 1 fight. they clearly seem to have some underlying structure under the cloth wrap, and I haven't been able to find anything that states what it was made from.
This may not be the correct forum for this, being a purely decorative aspect of armoring. I couldn't decide if this should go into this forum, or the research forum.
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
I think what you are talking about is a Torse.
Here is how I did mine.
And you end up with this:
Here is how I did mine.
And you end up with this:
Insane Irish
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Re: Greathelm Mantle, construction advice?
This forum is fine, and your other best choice would be Interpretive Recreation, rather than Historical. If you're asking for construction advice, Interpretive Recreation is a great resource for just about anything that's not metal armour itself (but metal armour certainly isn't excluded). Historical is more for discussion of research behind a given subject. Discussing the historical evidence and context for torses would be good fodder for the Historical forum.Feargus wrote:This may not be the correct forum for this, being a purely decorative aspect of armoring. I couldn't decide if this should go into this forum, or the research forum.
- Bernhart von Bruck
- Archive Member
- Posts: 1900
- Joined: Mon Aug 14, 2000 1:01 am
- Location: Overton, TX USA
- Contact:
Chello!
And what Irish is not saying is this: look at the colors of the pictured torses. This was his solution to stickers on helms for Gulf Wars. Blue/White for Trimaris, Gold/Black for Ansteorra.
And what Irish is not saying is this: look at the colors of the pictured torses. This was his solution to stickers on helms for Gulf Wars. Blue/White for Trimaris, Gold/Black for Ansteorra.
Herr Bernhart von Bruck
man-at-arms to Sir Ian MacBaird
Those people who trained with sticks were highly aware that they were practicing to use flat swords. Throwing intentionally flat blows is NOT swordsmanship....it is gay.
--Sir Vitus
man-at-arms to Sir Ian MacBaird
Those people who trained with sticks were highly aware that they were practicing to use flat swords. Throwing intentionally flat blows is NOT swordsmanship....it is gay.
--Sir Vitus
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
yep!Bernhard von Bruck wrote:Chello!
And what Irish is not saying is this: look at the colors of the pictured torses. This was his solution to stickers on helms for Gulf Wars. Blue/White for Trimaris, Gold/Black for Ansteorra.
They worked well, even if I did have to argue my point with the woman handing out stickers.
Insane Irish
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
Last year at Gulf Wars. The blue and white is for the Trimaran side, the black and gold for the Ansteorran.Owyn wrote:That's SO much better than stickers or bits of colored tape. Nicely done!
If I might ask, when were these used? And what was the purpose behind them? Were they purely decorative, or symbolic, or...something else? Thanks - it's a pretty nice addition to a helm!
I didn't know know which side my kingdom was fighting for, so I made 2 just in case.
I simply slipped them on and told the sticker lady that she needed not put a horrid sticker on my nice helm because I made color appropriate torses.
After a bit of discussing it, she aquiessed to my request.
Insane Irish
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
-
- Archive Member
- Posts: 248
- Joined: Fri Jul 05, 2002 1:01 am
- Location: OKC, OK, USA
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
Mine are pressure fit.Cassius the Rabbit wrote:They are A GREAT way to not have stickers on your helms. How are they attached? Are they just tied on? Do you have any problem with them coming off in battle?
I measured the length needed for them to fit around the helm then subtracted that amount by 1". Tied it off and slipped it on. I also put a few lengths (about 1" long) of double stick tape on the inside of the torse to keep it still.
I wore it for a whole week at Gulf Wars and it never once came off.
Now, my helm has a natural shape to keep them on, depending on your helm you may need to add tape or ties to keep it on. Each helm is different.
Insane Irish
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
As far as "armour accoutrement" goes, think more tourneys vice war ( or in the case of a live football game, the game or the cheeerleaders).
Another idea on that thread is if a style of armour was all the rage, how could the common soldier figure out who to follow?
For cheap, using poly/cotton broadcloth would suffice [45"wide stuff goes for about $3 a meter (little longer then a yard, 110yrds is 100m) locally)
Don
Another idea on that thread is if a style of armour was all the rage, how could the common soldier figure out who to follow?
For cheap, using poly/cotton broadcloth would suffice [45"wide stuff goes for about $3 a meter (little longer then a yard, 110yrds is 100m) locally)
Don
-
- Archive Member
- Posts: 5623
- Joined: Mon Oct 23, 2000 1:01 am
Well, it sort of depends on what you're thinking of. The torse and mantle were part of 13th century armor fashion, and they survived through the 14th century worn over greathelms. An item superficially similar to a torse was worn over bascinets -the name escapes me, 14th century mafia will know- but it's a big padded donut for properly fitting the greathelm, and ranged from plainly functional, to heraldic, to brocaded and bejeweled.Owyn wrote:Again, very nice stuff. Actually, I meant historically, when were helms adorned in this manner? Some cursory Googling has indicated it was used as a part of heraldry, but this is a piece of armor accoutrement I am completely unfamiliar with.
Memento, homo, quod cinis es! Et in cenerem reverentis!
- es02
- Archive Member
- Posts: 814
- Joined: Thu Oct 02, 2008 7:03 pm
- Location: Brisbane Australia
- Contact:
I was always of the understanding, at least from a 14thC perspective that it was used as part of ones heraldic achievement (display shield and crested greathelm) as part of the helm crest.Destichado wrote:Well, it sort of depends on what you're thinking of. The torse and mantle were part of 13th century armor fashion, and they survived through the 14th century worn over greathelms. An item superficially similar to a torse was worn over bascinets -the name escapes me, 14th century mafia will know- but it's a big padded donut for properly fitting the greathelm, and ranged from plainly functional, to heraldic, to brocaded and bejeweled.Owyn wrote:Again, very nice stuff. Actually, I meant historically, when were helms adorned in this manner? Some cursory Googling has indicated it was used as a part of heraldry, but this is a piece of armor accoutrement I am completely unfamiliar with.
[img]http://lionrampant.com.au/gallery/album ... ampion.jpg[/img]
On the left of this shot you can see a heraldic achievement very nicely failing to illustrate my point (edit: but should give you an idea of what I'm on about) where he has his bishops hat as his helm creast the torse would sit just below that holding on the cap/mantle.
Andrew McKinnon wrote:I can drink proficiently in several languages.
Armouring and pattern wiki. Please contribute!Aldric Valcerre wrote:I light the way ahead using bits of the bridges I've burnt behind me.
- Richard Blackmoore
- Archive Member
- Posts: 4990
- Joined: Wed Sep 20, 2000 1:01 am
- Location: Bay Shore, NY USA
You are possibly referring to an 'orle'.Destichado wrote:Well, it sort of depends on what you're thinking of. The torse and mantle were part of 13th century armor fashion, and they survived through the 14th century worn over greathelms. An item superficially similar to a torse was worn over bascinets -the name escapes me, 14th century mafia will know- but it's a big padded donut for properly fitting the greathelm, and ranged from plainly functional, to heraldic, to brocaded and bejeweled.Owyn wrote:Again, very nice stuff. Actually, I meant historically, when were helms adorned in this manner? Some cursory Googling has indicated it was used as a part of heraldry, but this is a piece of armor accoutrement I am completely unfamiliar with.
Richard
Is the SCA a better place for having you in it? If not, what are you doing there?
- Donald St. Colin
- Archive Member
- Posts: 971
- Joined: Sat Jan 05, 2008 1:06 am
- Location: Ligonier, Pa.
Took InsaneIrish's advice. Here is how my torse came out for spring crown. Has my Lady's arms on it.
- Attachments
-
- TORSE.jpg (16.14 KiB) Viewed 5824 times
Leave the SCA better than you found it. Fight alot of cool people along the way.
Only the weak are cruel. Gentleness can only be expected from the strong.
Only the weak are cruel. Gentleness can only be expected from the strong.
- InsaneIrish
- SQUEEE!
- Posts: 18252
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Jefferson City Mo. USA
- Donald St. Colin
- Archive Member
- Posts: 971
- Joined: Sat Jan 05, 2008 1:06 am
- Location: Ligonier, Pa.
-
- Archive Member
- Posts: 380
- Joined: Wed Apr 16, 2014 5:05 am
- Location: Vandalia Ohio USA, Flameing Griffon Barony
Re: Greathelm Mantle, construction advice?
Just a thanks on this one. I was able to make my own with my colors. And its also how i found this forum. So double thanks. Ill post a helm pic when i get on my pc next!
"No. Great men are forged in fire. It is the privilege of lesser men to light the flame. Whatever the cost."
-
- Archive Member
- Posts: 26725
- Joined: Sun Oct 21, 2001 1:01 am
- Location: Port Hueneme CA USA
Re: Greathelm Mantle, construction advice?
Then -- welcome and well come, Wolf16mt. May your stay with us be long and profit you much. Wolf for the
RESURRECT-O-THREAD.
RESURRECT-O-THREAD.
Re: Greathelm Mantle, construction advice?
There is good reason to leave the torse off 14th century helms. They didn't use them.
viewtopic.php?f=16&t=151175
viewtopic.php?f=16&t=151175
ferrum ferro acuitur et homo exacuit faciem amici sui
- Johann ColdIron
- Archive Member
- Posts: 7421
- Joined: Mon Mar 03, 2003 2:01 am
- Location: Raleigh, NC
Re: Greathelm Mantle, construction advice?
Thought I had already given this advice but- Just remember when you make and use one of these on your helm that you have added a giant padded dougnut to it and calling blows will need to be recalibrated. They can make calling flat snaps that land on it very difficult.
John Cope/ Sir Johann ColdIron, Master- Order of the Laurel
I'm not dead yet!
I'm not dead yet!
-
- Archive Member
- Posts: 380
- Joined: Wed Apr 16, 2014 5:05 am
- Location: Vandalia Ohio USA, Flameing Griffon Barony
Re: Greathelm Mantle, construction advice?
Yeah, I feel useful now. im more of a refaire visitor with the want of getting into the SCA style duels, fighting. but again. thanks.
- Attachments
-
- Also I have this not so great pic but I have my helm with me. and ill add it as a profile pic.
- Renfest 2013 013 - Copy3.jpg (87.43 KiB) Viewed 4655 times
"No. Great men are forged in fire. It is the privilege of lesser men to light the flame. Whatever the cost."
-
- Archive Member
- Posts: 26725
- Joined: Sun Oct 21, 2001 1:01 am
- Location: Port Hueneme CA USA
Re: Greathelm Mantle, construction advice?
Cool... and with your location we can offer a clue about the nearest Middle Kingdom SCA group to you to go play with... hmm. [flip flip flip]
It might have been a convenience for out-of-Kingdomers had the splashiest, most interactive part of the Midrealm's locations page included the mundane names of the places, instead of stopping at the SCA Barony and Shire names. And their lovely heraldry.
But with some workaround, I see you're in the Midrealm Region of South Oaken, likely Barony of Flaming Gryphon. You can sort out the counties reff'd on the page more easily than I. Looks like you can find a lot of playmates right quick if you haven't found them already.
Region of South Oaken. Includes Cincinnati for sure, maybe a chapter in Dayton OH.
Anyway, Barony of Fenix is about 35 miles from your place, it being Cincinnati.
It might have been a convenience for out-of-Kingdomers had the splashiest, most interactive part of the Midrealm's locations page included the mundane names of the places, instead of stopping at the SCA Barony and Shire names. And their lovely heraldry.
But with some workaround, I see you're in the Midrealm Region of South Oaken, likely Barony of Flaming Gryphon. You can sort out the counties reff'd on the page more easily than I. Looks like you can find a lot of playmates right quick if you haven't found them already.
Region of South Oaken. Includes Cincinnati for sure, maybe a chapter in Dayton OH.
Anyway, Barony of Fenix is about 35 miles from your place, it being Cincinnati.
"The Minstrel Boy to the war is gone..."
-
- Archive Member
- Posts: 380
- Joined: Wed Apr 16, 2014 5:05 am
- Location: Vandalia Ohio USA, Flameing Griffon Barony
Re: Greathelm Mantle, construction advice?
Thanks for the footwork on the sca findings. I appreciate it. I am going to look into that and see where it goes.
"No. Great men are forged in fire. It is the privilege of lesser men to light the flame. Whatever the cost."
-
- Archive Member
- Posts: 26725
- Joined: Sun Oct 21, 2001 1:01 am
- Location: Port Hueneme CA USA
Re: Greathelm Mantle, construction advice?
Should net you, as I suggested, lots of swordplaymates to keep in shape with!
I see you have a helm and something like a mail coif -- and that your surcoat is at least partly yellow... any part of harness that you are missing? Or want improved? Official SCA Armour Standards mandate hard coverage of elbows, knees, 'nads and kidneys. The Kingdom of the Middle may have additional requirements in the kingdom Armour Standards posted on its website, to have you, as the parlance goes, Lists legal. (Properly equipped to compete fully in the Crown Tournaments, and other tournaments.)
I see you have a helm and something like a mail coif -- and that your surcoat is at least partly yellow... any part of harness that you are missing? Or want improved? Official SCA Armour Standards mandate hard coverage of elbows, knees, 'nads and kidneys. The Kingdom of the Middle may have additional requirements in the kingdom Armour Standards posted on its website, to have you, as the parlance goes, Lists legal. (Properly equipped to compete fully in the Crown Tournaments, and other tournaments.)
"The Minstrel Boy to the war is gone..."
- Donald St. Colin
- Archive Member
- Posts: 971
- Joined: Sat Jan 05, 2008 1:06 am
- Location: Ligonier, Pa.
Re: Greathelm Mantle, construction advice?
Belmonte Spain. IMCF world championship.
- Attachments
-
- IMG_52989753628251.jpeg (99.54 KiB) Viewed 1041 times
Leave the SCA better than you found it. Fight alot of cool people along the way.
Only the weak are cruel. Gentleness can only be expected from the strong.
Only the weak are cruel. Gentleness can only be expected from the strong.