FS: Lamellar (sold)

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Mon Feb 15, 2010 10:56 am

Selling my anodized brass aircraft aluminum lamellar from http://www.eldesar.com/.

I am 6'5" tall, 230lb, looking for $425 or best offer. Lacing it took forever.

There are approximately 550 plates in this suit, and I also have around 85 spare plates that were not used in it that I would send with it.

To buy these plates new would cost around $415 bucks or so, then you get the fun task of lacing them all together, but this time the work is done for you! Unless you want to alter it of course.

The most current picture I have of the rig at the bottom left hand corner. I've relaced it a few times trying to find how to make it the most comfortable.

Changes from that picture are that one of the rows above the belt line has been moved to bellow the belt line to extend it a bit. This suit also has a belt strip laced into it so that you can put your belt on, and it won't fall off all the time, and it also enables you to bend at the waist a lot better instead of pretending to be the Tin Man.

[img]http://www.dark-horse.ca/armor_evolution.jpg[/img]

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Mon Feb 15, 2010 10:57 pm

Come oooon you know you waaaannaa

herrhauptmann · Post by **herrhauptmann** » Mon Feb 15, 2010 11:20 pm

I've got a friend who I think would gladly kill for your 2007 kit. Anyway, if you're still trying to sell your lamellar when he gets back, I'll send him the link.
Added plus, he's your height as well.

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Tue Feb 16, 2010 6:18 pm

Still looking for a buyer, I want to buy me some solid brass fluted plates cuz I'm silly.

seanjohnson1 · Post by **seanjohnson1** » Tue Feb 16, 2010 11:27 pm

what is total weight?
i am 6 220-how much would i have to tailor them?

any interest in a trade? i have lots of stuff

heck you could sell what i have to trade-i hate selling stuff

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Tue Feb 16, 2010 11:34 pm

I think it's about 8 lbs.

I doubt you'd have to tailor it much, the shoulder straps adjust, may need to add some of the bonus plates to the sides? I dunno your build.

I'm not interested in a trade currently, it's selling so I can buy stuff. heh

seanjohnson1 · Post by **seanjohnson1** » Wed Feb 17, 2010 12:05 am

ahh about what chest and waist is it fit for?

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Wed Feb 17, 2010 12:42 am

I'm a 46 chest 40 waist

Bran_mac_Conlae · Post by **Bran_mac_Conlae** » Wed Feb 17, 2010 4:22 am

What is the current best offer for this?

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Wed Feb 17, 2010 10:51 am

Bran_mac_Conlae wrote:What is the current best offer for this?

Currently someone says they're going to sell some stuff and buy it, but who knows.

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Fri Feb 19, 2010 12:03 am

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Fri Feb 19, 2010 3:32 pm

Still looking to offload this so I can get some different plates.

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Fri Feb 19, 2010 6:04 pm

New price on this is $425 since all I want is to replace it with other plates I don't need a profit.

I think that's bellow the cost of the plates alone.

owen matthew · Post by **owen matthew** » Fri Feb 19, 2010 9:36 pm

Magnus of the Dark Wyvern wrote:New price on this is $425 since all I want is to replace it with other plates I don't need a profit.

I think that's bellow the cost of the plates alone.

550 of their treated plates comes out to 357.50.

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Fri Feb 19, 2010 9:37 pm

owen matthew wrote:
Magnus of the Dark Wyvern wrote:New price on this is $425 since all I want is to replace it with other plates I don't need a profit.

I think that's bellow the cost of the plates alone.

550 of their treated plates comes out to 357.50.

I included the 80 or so extra plates I have in that.

owen matthew · Post by **owen matthew** » Sat Feb 20, 2010 3:30 am

Magnus of the Dark Wyvern wrote:
owen matthew wrote:
Magnus of the Dark Wyvern wrote:New price on this is $425 since all I want is to replace it with other plates I don't need a profit.

I think that's bellow the cost of the plates alone.

550 of their treated plates comes out to 357.50.

I included the 80 or so extra plates I have in that.

Sorry, I missed that. With the 85 extra its still 412.75. I did'nt mean to say anything, I just saw that you said it was cheaper than thhe actual cost of the plates. ck with your sale, its a very nice vest!

Corby de la Flamme · Post by **Corby de la Flamme** » Sat Feb 20, 2010 10:46 am

Your picture link is dead.

Are there any pics of the actual piece? I am interested.

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Sat Feb 20, 2010 10:51 am

Corby de la Flamme wrote:Your picture link is dead.

Are there any pics of the actual piece? I am interested.

Fixed

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Sat Feb 20, 2010 10:53 am

owen matthew wrote:
Magnus of the Dark Wyvern wrote:
owen matthew wrote:
Magnus of the Dark Wyvern wrote:New price on this is $425 since all I want is to replace it with other plates I don't need a profit.

I think that's bellow the cost of the plates alone.

550 of their treated plates comes out to 357.50.

I included the 80 or so extra plates I have in that.

Sorry, I missed that. With the 85 extra its still 412.75. I did'nt mean to say anything, I just saw that you said it was cheaper than thhe actual cost of the plates. ck with your sale, its a very nice vest!

No worries... my math is just bad I guess.

Corby de la Flamme · Post by **Corby de la Flamme** » Sat Feb 20, 2010 12:26 pm

You mean bottom right hand corner for the pic, right?

Where does it open/close?left side?

It looks like you're wearing it over mail in that 2009 pic. Is that right? So it is sized big for you?

Magnus Ulfgarsson · Post by **Magnus Ulfgarsson** » Sat Feb 20, 2010 8:16 pm

Corby de la Flamme wrote:You mean bottom right hand corner for the pic, right?

Where does it open/close?left side?

It looks like you're wearing it over mail in that 2009 pic. Is that right? So it is sized big for you?

Bottom right

Both sides, it has 1 buckle on each side, then a strip where you put a belt for the final spot.

It's not really big for me, there's a small amount of overlap with the chain.