WTB feastgear FOUND

Bran_mac_Conlae · Post by **Bran_mac_Conlae** » Thu Feb 18, 2010 9:43 am

I'm looking to get a hold of some cheap feastgear, more specifically a plate and a bowl. New, used, second-hand, whatever material, I don't really care. Horn or wooden is prefered.

Cian of Storvik · Post by **Cian of Storvik** » Thu Feb 18, 2010 9:58 am

I have a plate, bowl and cup for sale (I need to take a picture of the cup).
Which you can have for $13+shipping.

http://forums.armourarchive.org/phpBB2/ ... p?t=111346

I may also have a pretty swanky knife (damascus steel and bone handle) for sale, as soon as I figure out how much I should be asking for it.
-Cian

Bran_mac_Conlae · Post by **Bran_mac_Conlae** » Thu Feb 18, 2010 10:00 am

Ok, get back to me about the knife and we'll go from there

Mike Garrett (Orc) · Post by **Mike Garrett (Orc)** » Thu Feb 18, 2010 3:48 pm

I have this - http://cgi.ebay.co.uk/Drinking-HORN-set-mug-spoon-plate-re-enactment-LARP-B_W0QQitemZ170448119817QQcmdZViewItemQQptZUK_Toys_RolePlaying_RL?hash=item27af7fe809

Plus a couple of other bits and pieces on there

Bran_mac_Conlae · Post by **Bran_mac_Conlae** » Thu Feb 18, 2010 5:09 pm

How much is that set in USD Mike?

Mike Garrett (Orc) · Post by **Mike Garrett (Orc)** » Thu Feb 18, 2010 5:55 pm

Current exchange rate makes Â£25 = $38:72
Shipping to the USA would be $13

Exchange rate is in your favour at the moment chaps!

Woodstock · Post by **Woodstock** » Thu Feb 18, 2010 7:13 pm

Cian of Storvik wrote:I have a plate, bowl and cup for sale (I need to take a picture of the cup).
Which you can have for $13+shipping.

http://forums.armourarchive.org/phpBB2/ ... p?t=111346

I may also have a pretty swanky knife (damascus steel and bone handle) for sale, as soon as I figure out how much I should be asking for it.
-Cian

If Bran backs out I'll take 'em!

Cian of Storvik · Post by **Cian of Storvik** » Thu Feb 18, 2010 10:31 pm

Here are a few pics of the cup and the knife.
The cup is 3" diam x 3.25" height and holds a bit over 6 oz. of liquid.

The knife is pattern welded with pinned bone scales. Overall it's almost 8.75" (and a tad bit longer with the scabbard). The blade is 4.87" The blade is robust with with a 5/32" width at spine which has a constant distal taper to the point and a wedge cross-section.

And pics again of the plate and bowl:

Sorry about the pictures. I used the camera on the cell phone. Let me know if you need any other dimensions or information.
I'd like $50 for the damascene knife.

The other 3 wooden items would be $12.75 + shipping from 20705.
-Cian