Aluminum Harness Kits... Finish it yourself in time for XMAS
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
Aluminum Harness Kits... Finish it yourself in time for XMAS
I Have 2 full suit harness kits available.
#1 is a 14th c Mogami Do with Kusazuri and Sode (All lacing holes punched), flat shin and forearm splints, haidate Plates, flat No Dowa style gorget (With all lacing holes MARKED), Oriental Gauntlet pieces (thumb and Thmb Knuckle fully dished), and dished Knee and Elnow cops in Aluminum.
At lowest Kit price includes FLAT pieces for SS Zunari boshi... I Have a SS Zunari almost completed That could be added in .. but that would up the price a bit.
#2 is a 15th C Turkish potlid body curaisse (Fully shaped) with Finished Brig Gorget (Med or Large), fully shaped Alwhyte Pauldrons, Bazu style Vambs and knee cupping fitted (Anatomical) greaves (Mainly shaped), Stainless knee and elbow cops, Oriental gauntlet kit (Thumbs and knuckles fully dished). I have a SS Turkish style conical (Bowl assembled) with dog ear cheeks and a lobster tail that could go with it. Helm fits a Larger head.
Both harness's would fit from 5'10" to 6'2" depending on torso length and girth.
Mogami do ID circumference is approx 44".
Turkish is close to that but actual size would be determined by how much space between the plates (normally connected by chainmail).
I have posted pix of these harness kits before. IF you Actually want to talk price let me know and I'll post pix again.
All Aluminum is .080 thick 6061 AAA in T-6.
All Stainless steel is 16 Ga 304.
#1 is a 14th c Mogami Do with Kusazuri and Sode (All lacing holes punched), flat shin and forearm splints, haidate Plates, flat No Dowa style gorget (With all lacing holes MARKED), Oriental Gauntlet pieces (thumb and Thmb Knuckle fully dished), and dished Knee and Elnow cops in Aluminum.
At lowest Kit price includes FLAT pieces for SS Zunari boshi... I Have a SS Zunari almost completed That could be added in .. but that would up the price a bit.
#2 is a 15th C Turkish potlid body curaisse (Fully shaped) with Finished Brig Gorget (Med or Large), fully shaped Alwhyte Pauldrons, Bazu style Vambs and knee cupping fitted (Anatomical) greaves (Mainly shaped), Stainless knee and elbow cops, Oriental gauntlet kit (Thumbs and knuckles fully dished). I have a SS Turkish style conical (Bowl assembled) with dog ear cheeks and a lobster tail that could go with it. Helm fits a Larger head.
Both harness's would fit from 5'10" to 6'2" depending on torso length and girth.
Mogami do ID circumference is approx 44".
Turkish is close to that but actual size would be determined by how much space between the plates (normally connected by chainmail).
I have posted pix of these harness kits before. IF you Actually want to talk price let me know and I'll post pix again.
All Aluminum is .080 thick 6061 AAA in T-6.
All Stainless steel is 16 Ga 304.
William S. Giltner
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
Seems I also Have a Lorica Segmentata Technically in kit form as I havent riveted the straps in.
Abdominal's are 48" total, Thoracic plates sized for SCA Med to Large.
It Is Just the Body... But ask nicely and Maybe vambs and greaves could go out with it.
400 Cash as Is FIRM
Abdominal's are 48" total, Thoracic plates sized for SCA Med to Large.
It Is Just the Body... But ask nicely and Maybe vambs and greaves could go out with it.
400 Cash as Is FIRM
- Attachments
-
- Lorica Abdominals.jpg (56.1 KiB) Viewed 1226 times
-
- Lori Neck detail.jpg (51.21 KiB) Viewed 1226 times
-
- Lorica Upper.jpg (49.41 KiB) Viewed 1226 times
William S. Giltner
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft
Lrd Tatsuo Okami
Iron River Armoury
In service to the Craft
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
-
SCAdian_Dragon
- New Member
- Posts: 22
- Joined: Thu Jul 23, 2009 11:41 pm
- Location: House Chibiri, RedeWolfDen Shire, Murray KY
- Tatsuo Okami
- Archive Member
- Posts: 955
- Joined: Sun Feb 22, 2004 11:33 am
- Location: Salida, CO. USA
- Contact:
-
SCAdian_Dragon
- New Member
- Posts: 22
- Joined: Thu Jul 23, 2009 11:41 pm
- Location: House Chibiri, RedeWolfDen Shire, Murray KY
