Roset washers?

Duc Kjosua · Post by **Duc Kjosua** » Sat Feb 10, 2001 7:11 pm

(search is not working for me...again)
I am trying to find a place that sells brass washers. I dont really know what they are called, but the nickle ones at home depot are called roset. They arent exactly alike, but are close enough. Where would I find a place that sells decorative washers? Or do I need to make them myself?

Sinric · Post by **Sinric** » Sat Feb 10, 2001 7:32 pm

Argent Company has (B-U1) Brass Stamped Flower Plates for $2 each (or $1.50 each for 25 or more).

They are shown on this page: http://store.argentcompany.org/armasst.htm

Here the image of the item: http://store.argentcompany.org/images/b-u1.jpg

------------------
Craig Nadler
cwn@nh.ultranet.com
http://www.eskimo.com/~cwn/

Sinric · Post by **Sinric** » Sat Feb 10, 2001 7:35 pm

Also checkout:

The fleur-de-lis girdle plate(B-R1) and square flower plate (L-3) on http://store.argentcompany.org/belt.htm

------------------
Craig Nadler
cwn@nh.ultranet.com
http://www.eskimo.com/~cwn/

Ideval · Post by **Ideval** » Sat Feb 10, 2001 10:56 pm

The commercial rosettes at such places as ACE, Home Depot, and Lumberjack will sometimes split while setting them with a rivet. A leather washer beneath the rosette will help eliminate this.

That said, I only use them for belts, baldrics, and the leather on open-face helmet strapping. They look especially good if the helmet also has a sturdier rosette along its brim - the Morion I use as an example.

Oh yeah, and no brass; nickel only. I don't understand the fascination with yellow metals. Happy decorating.

------------------
IdÃ«val
The Huntsman of
I-NossÃ« LÃºmÃ«vanwa
My mind opens wide when I roar

Drake Orion · Post by **Drake Orion** » Mon Feb 12, 2001 1:59 pm

I use them on my Coat of Plates...you can see a close up of them here:
Oops! Forgot to pay my host fee...I'll have to pay it now...
I got mine at Lowes and Home depot...I bought them all and they have not restocked them since and that was 3 months ago..

Adriano · Post by **Adriano** » Mon Feb 12, 2001 3:33 pm

I think Tandy may also have some suitable hardware.