Update Moving and cannot have a shop anymore.

[Spence]

Hey folks I am moving in a few months and where I will be living is not blacksmith shop friendly.
Most of my tools where bought and never used because I was in the middle of setting up the shop when I found out the bad news.

TFS Smithy Special 400 lb anvil 1,750.00-------> this price is for the 300 lbs I paid well over $2400 for this anvil and it is is pristine condition.

Anvil is still for sale.

Swedish hammers
1000g (2.2 lb.) Peddinghaus Brand: $35.00 ---SOLD
1500g (3.3 lb) Peddinghaus Brand: $42.00 ---SOLD
2000g (4.4 lb) Peddinghaus Brand: $45.00 ---SOLD
Buy all the hammers together and it's $100.00 ---SOLD

Blacksmiths 3 ft leg vise $60

Beverly B3 shear in pristine condition, has only cut aircraft aluminum sheet and blade is nick free and sharp.
Comes with a nice tripod welded stand. You can unbolt the shear or keep it on the stand. $600 ---SOLD

I bought these from Hal and sad to say I never had the pleasure of using them.



Starter kit with Hal's bonus Y-Stake tool______$178.00 ---SOLD



Full Finger Gaunt tool Set:
New tool holder for the gaunt tool kit.___$80.00
9 piece gauntlet tool set_____________ $200.00
Metacarpal stake___________________$60.00
Pyramid stake male_________________$50.00
Pyramid stake female________________$60.00

Also have a full roll of refractory wool to make a forge with. $100 for the whole roll.

Thanks for looking.

[Keegan Ingrassia]

Good Lord, man! Your loss is the buyer's gain, but...box these up or something! Let them be carefully stored, until you have a shop again.

[Gryffinclaw]

I am interested in your Halberds starter kit. Will you by chance be attending Meridian Crown List? I will PM you

[Spence]

I am not going to be but I work in Atlanta so I can meet if you would like if you are in the area.

Thanks

[Scott]

I'm interested in the three hammers & the leg vice.
Any pictures?

- Scott

[Pitbull Armory]

Can I see the shapes of the peddinghaus hammers?


Ty

PB

[Spence]

Don't have a pic of the leg vise till I get home tonight but will post it.

Here are the Hammers and the Anvil for now.

[Scott]

Dibs on the hammers & vice (pending pics & shipping charges).
- Scott

[Knight Sir James]

I am interested in your Halberds starter kit.

Second in line on the Halberds starter kit too, please.

[Spence]

Halberds starter kit is available as I have not gotten any PM from Gryffinclaw

Thanks

[Brennainn]

Store the stuff you will find it difficult to replace later and those who have made dibs will understand.

[Knight Sir James]

Halberds starter kit is available as I have not gotten any PM from Gryffinclaw

Thanks

Cool, I'll take it. I have a set of greaves I need to dish ASAP. Post or PM your paypal and I will send money your way. Thanks!

[Thaddeus]

Store the stuff you will find it difficult to replace later and those who have made dibs will understand.

QFT
That being said short selling the anvil like that is giving someone quite a deal.

[Spence]

Starter kit with Hal's bonus Y-Stake tool ------Sold

hammers & leg vice---Sold pending payment

Beverly B3 shear and stand ---Sold pending payment

Thanks

[Spence]

Starter kit with Hal's bonus Y-Stake tool ------Sold

hammers & leg vice---Sold pending payment

Beverly B3 shear and stand ---Sold

Thanks

[Spence]

Update-----

Still for sale

TFS Smithy Special 400 lb anvil 1,750.00

New tool holder for the gaunt tool kit.___$80.00
9 piece gauntlet tool set_____________ $200.00
Metacarpal stake___________________$60.00
Pyramid stake male_________________$50.00
Pyramid stake female________________$60.00

Blacksmiths 3 ft leg vise $60

full roll of refractory wool to make a forge with. $100 for the whole roll

Thanks

[Thomas Powers]

Leg vises are usually described by how wide the jaws are with 4" jaws quite common and 6+ inch jaws rarer and coveted. Whether all the mounting parts are there makes a difference too. (and at 36" it sounds like the leg was shortened at some point as well.) However what I mainly look for is the state of the screw and screwbox as everything else is easily replaced, repaired or rebuilt compared to that.

Perhaps a more through description?

[Spence]

Update-----

Still for sale

TFS Smithy Special 400 lb anvil 1,750.00

9 piece gauntlet tool set_____________ $200.00
Metacarpal stake___________________$60.00
Pyramid stake male_________________$50.00

Blacksmiths 3 ft leg vise $60

full roll of refractory wool to make a forge with. $100 for the whole roll

Thanks

[Tatsuo Okami]

Hi Spence
What thickness is the Rock Wool? Is there a rating number or code on the packaging.

[Spence]

It is 2 inch x 24 inch wide Kaowool I believe it is RT #6.

I will look at it tonight when I get home but I know it is a full roll, I think it is about 12 1/2 feet of it.

Thanks

[Spence]

Still for sale

TFS Smithy Special 400 lb anvil 1,500.00-------> I paid well over $2400 for this anvil and it is is pristine condition.

2 inch x 24 inch wide Kaowool I believe it is RT #6. 25 foot roll 100.00

9 piece gauntlet tool set_____________ $200.00
Metacarpal stake___________________$60.00
Pyramid stake male_________________$50.00

Thanks