For trading/Selling/and posting items that you need very badly.
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Mon Jun 18, 2012 3:32 pm
This is a re-post of my last axe. The deal fell through (Life happens!), so I'm offering it again
The head is made from glued and sewn leather with a foam striking edge and covered in plastidip, then sewn to the shaved and stained rattan haft. It's 62 1/2" long without a buttspike (which I can add for you at no extra charge). $65 plus shipping. As always I take PayPal at
m_kreitzer@yahoo.com , or you can elect to have me email you a paypal invoice so you can use a credit or debit card. Thanks!
Last edited by
Thorgrimr on Mon Jul 09, 2012 4:21 pm, edited 2 times in total.
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Mon Jun 18, 2012 6:41 pm
That price works out to about $75 plus shipping, btw. Shipping these ain't cheap...
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Mon Jun 18, 2012 6:44 pm
Alternately, you can save $15 and have me deliver it to you at Pennsic, or Baron wars if you're going there...
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Mon Jun 18, 2012 6:48 pm
As a matter of fact, if you want to order one for Pennsic delivery, feel free.
$75, 50% down, balance on delivery.
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Tue Jun 19, 2012 2:14 pm
$65 plus shipping is the best I can do.
Paladin74
Archive Member
Posts: 10904 Joined: Fri May 13, 2011 11:05 am
Post
by Paladin74 Tue Jun 19, 2012 4:32 pm
That's the nicest one I've seen thus far, man. If I were into SCA, I'd be all over it. GLWS.
eidelon
Archive Member
Posts: 253 Joined: Thu Jun 03, 2010 12:12 pmLocation: steppes, ansteorra
Post
by eidelon Wed Jun 20, 2012 1:18 am
nice though you may want to check those edges with a marshals gauge they may be able to penetrate more than .5 inches inside a helm
Randwulf Griffin Inch MacBreanach
Edward of Blackthorn
Archive Member
Posts: 359 Joined: Fri Oct 27, 2000 1:01 amLocation: olean, ny blackwater
Contact:
Post
by Edward of Blackthorn Wed Jun 20, 2012 5:46 am
Thorgrimr has been doing it a while i have never seen any thing to the contrary here on the archive.
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Wed Jun 20, 2012 9:16 am
Sold!
Halvgrimr
Billy Bob
Posts: 13573 Joined: Mon Apr 23, 2001 1:01 amLocation: Columbia Missouri
Post
by Halvgrimr Wed Jun 20, 2012 10:13 am
Thorgrimr
Halvgrimr Riddari Steven Wright
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Wed Jun 20, 2012 11:13 am
Nope. Not a bit, if we're talking "oval" type cross section as opposed to "flat as a board". Totally flat would mean that I would have to buy more expensive rattan.
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Mon Jul 09, 2012 4:22 pm
Re-post. Check the top post. Thanks!
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Tue Jul 10, 2012 11:47 am
Thorgrimr
Archive Member
Posts: 2522 Joined: Fri May 04, 2001 1:01 amLocation: near Canton, Ohio
Post
by Thorgrimr Wed Jul 11, 2012 4:51 pm
One last
$75, 50% down, balance on delivery.
