For Free... Oxygen Tank Valve Covers

Sigeric · Post by **Sigeric** » Thu Jun 27, 2002 9:53 am

Greetings all,

If anyone is interested, I have two valve covers in very good shape that could be converted into some type of ball stake. I don't really have any use for them, so if you want one or both just let me know.

All I'm asking is that you pay for the shipping (I would guess it won't be more than a couple of bucks).

Sigeric

Ideval · Post by **Ideval** » Thu Jun 27, 2002 11:52 am

While I don't need another,
I wanted to let everyone know that these covers can be very useful as planishing stakes.
They are just under 4 inches in diameter, and fairly strong.

IdÃ«val

Scott · Post by **Scott** » Thu Jun 27, 2002 4:02 pm

I may be interested. What diameter & how thick are they?

- Scott

Sigeric · Post by **Sigeric** » Thu Jun 27, 2002 4:12 pm

Hi Scott,

They are approximately 4 inches wide and 6 inches tall and about 1/4 inch thick. I will measure them tonight and post the exact size and I'll take a picture.

Sigeric · Post by **Sigeric** » Thu Jun 27, 2002 10:25 pm

Here's the info on the two covers.

http://members.aol.com:/fuersty/valve.jpg

Both are 3 1/2" Wide, about 3/16" Thick and the one on the left is 6" and the right is 6 1/2" in Height. I would guess they weigh less than a pound each.

If anyone is interested just let me know.

Thanks,
Sigeric

justmagnus · Post by **justmagnus** » Fri Jun 28, 2002 7:51 am

Hi Sigeric,

I would be interested in one. I am e-mailing you with my info. Let me know how much shipping will be and the best way to send it.

Thanks,
Rob

Sigeric · Post by **Sigeric** » Fri Jun 28, 2002 8:35 am

I checked the weight on these covers and they were a little heavier than I thought. Each one was just over 2 pounds. I will have to run to the post office to get "New" postage rates and let you know the exact cost.

Rob... I have your name down for one of them... do you want the one on the right or left? By chance are you going to Warriors & Warlords?

Guest · Post by **Guest** » Fri Jun 28, 2002 12:18 pm

I would be interested in the one on the right if it is still available.

Thanks

------------------
www.armurerieduroi.com

Scott · Post by **Scott** » Fri Jun 28, 2002 1:50 pm

Sigeric,

I sent you an email with my address.

Thanks,
Scott

Sigeric · Post by **Sigeric** » Fri Jun 28, 2002 2:39 pm

Thanks everyone for your interest, both covers are now spoken for.

Sorry Patrice I took the first two responces I received.

Scott will get the one on the left and Rob the one on the right. I'll contact you guys with the exact shipping costs later this evening.

Enjoy, Sigeric

Guest · Post by **Guest** » Fri Jun 28, 2002 2:50 pm

It's ok. If you ever come across another one like that, email me, I'll take it.

Thanks

------------------
www.armurerieduroi.com

justmagnus · Post by **justmagnus** » Fri Jun 28, 2002 4:39 pm

Hi Sigeric,

Yes, I am planning on going to Warriors & Warlords. If you are going also I have no problem waiting until then to get the cap.

It will be fun to meet someone else from the Archive.

Thanks,
Rob