Stainless gauntlets for sale !!

Trimariansoldier · Post by **Trimariansoldier** » Tue Jan 14, 2003 6:43 pm

Trying to sell these to raise funds to
purchase the COP Ld. David Clermont has
for sale.I hope the pic link works,if any questons please feel free to ask !!

http://photos.yahoo.com/trimariansoldier

Cedric · Post by **Cedric** » Tue Jan 14, 2003 7:01 pm

What size are they? How much are you asking?

Thorvold · Post by **Thorvold** » Tue Jan 14, 2003 7:44 pm

I am interested in these as well... email sent.

Thorv

Pheylin Quinn · Post by **Pheylin Quinn** » Tue Jan 14, 2003 9:20 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Trimariansoldier:

Trying to sell these to raise funds to
purchase the COP Ld. David Clermont has
for sale.I hope the pic link works,if any questons please feel free to ask !!

http://photos.yahoo.com/trimariansoldier<HR></BLOCKQUOTE>

Who made these?

LoganSilverAx · Post by **LoganSilverAx** » Tue Jan 14, 2003 9:22 pm

I also would like to know how much you are asking for them, and who made them.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 15, 2003 1:30 am

These were made by me under the tutelage
of Master Jeffery of Lincoln,a Trimarian
armoring laurel.
They are 6 lames with articulated metacarpal
plate ,floating cuff which is short made of 16 ga. stainless.
my hand measures 4 in across the knuckles
knuckles to fingertips is 4.5 in.
wrist to finger tip is 8 in
I wear an XL glove and these gauntlets transfer all shock to the weapon.
I will ask $175 and shipping,am also open
to trade.

Sixtus_Goetz · Post by **Sixtus_Goetz** » Wed Jan 15, 2003 9:55 am

Trimarian,

Would you be talking about Massa "G" who occasionaly posts on here? GAA armories?

Saranac Goetz

William Frisbee · Post by **William Frisbee** » Wed Jan 15, 2003 10:21 am

What are you looking for in trade for these gaunts?

Are they strapped?

Pheylin Quinn · Post by **Pheylin Quinn** » Wed Jan 15, 2003 10:37 am

<BLOCKQUOTE>quote:<HR>Originally posted by Depths_of_Mind:
Trimarian,

Would you be talking about Massa "G" who occasionaly posts on here? GAA armories?

Saranac Goetz<HR></BLOCKQUOTE>

Not Massa G.

I think I met Master Jeffrey a while back. Does he make aluminum war shields?

I asked because the rivet placing on the finger lames is quite curious.

Sixtus_Goetz · Post by **Sixtus_Goetz** » Wed Jan 15, 2003 12:28 pm

According to his web site, he can make any type of shield as long as its a flat one < as of right now >.. apparently he is working on a way to get them curved. Not sure if he makes them for the wars or not though.

Saranac Goetz

Pheylin Quinn · Post by **Pheylin Quinn** » Wed Jan 15, 2003 12:37 pm

Ah. Not the same person that I had in mind. The person that I was thinking of makes V-shaped war shields with a compound curve and crease down the center that are about 5.5 feet tall.

He makes them out of two pieces that are curved from top to bottom and then TIG welded. Excellent shields.

The one I had played with had a huge device engraved into the front of it.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 15, 2003 1:26 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Depths_of_Mind:
Trimarian,

Would you be talking about Massa "G" who occasionaly posts on here? GAA armories?

Saranac Goetz<HR></BLOCKQUOTE>

No not Massa "G" at all but I am lucky enough to know Massa "G" and have gotten some armor from him in the recent past.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 15, 2003 1:30 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Pheylin Quinn:
 Not Massa G.

I think I met Master Jeffrey a while back. Does he make aluminum war shields?

I asked because the rivet placing on the finger lames is quite curious.<HR></BLOCKQUOTE>

Yes.....He is the one that makes the
Asgardian "V" shields.
Also recently became a Knight as well.
The rivet placement is not the "standard"
placement yet with the more rounded shape of the lames allows for good articulation.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 15, 2003 1:34 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Evil_Merlin:
What are you looking for in trade for these gaunts?

Are they strapped?<HR></BLOCKQUOTE>

They can be stapped with a palm strap if you wish,otherwise that will be up to you as we each have our own preferences.
In trade i would be looking for a simple
type 1 wisby COP,like the one Ld. David Clermont had up for sale.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 15, 2003 5:56 pm

After further thought....
in trade I would also be interested in
a heater and gambeson( as have been discussed in other posts)

Christoffer · Post by **Christoffer** » Wed Jan 15, 2003 11:38 pm

Actually Master Geoffry Maynard ( I think that is what he is calling himself these days) is a Trimarian tent Laurel. The neat stuff he does with armour and shields is just a really nice bonus.

Pheylin Quinn · Post by **Pheylin Quinn** » Thu Jan 16, 2003 9:42 am

<BLOCKQUOTE>quote:<HR>Originally posted by Christoffer:
Actually Master Geoffry Maynard ( I think that is what he is calling himself these days) is a Trimarian tent Laurel. The neat stuff he does with armour and shields is just a really nice bonus.<HR></BLOCKQUOTE>

That is what I thought. I was unaware of any armouring laurels in Trimaris.

I think the only one that they ever had turned his medallion in:

Shosi sp? (Blacksword)

Trimariansoldier · Post by **Trimariansoldier** » Fri Jan 17, 2003 9:27 am

I am dropping the price on the gauntlets
to $140,thats a nifty $35 off !!!
Please feel free to contact me for further info or more pics.

CalebJohnson · Post by **CalebJohnson** » Fri Jan 17, 2003 10:22 pm

Would you trade for two heaters painted and straped. If you send your heraldic device ill paint it for you.

CalebJohnson · Post by **CalebJohnson** » Sat Jan 18, 2003 6:00 pm

Email sent

Trimariansoldier · Post by **Trimariansoldier** » Tue Jan 21, 2003 11:30 am

price is now $125

and am still willing to trade.
In trade I am looking for a gambeson
or curved heater shields in ether
wood or aluminum.

Thorvold · Post by **Thorvold** » Tue Jan 21, 2003 3:23 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Trimariansoldier:

price is now $125

and am still willing to trade.
In trade I am looking for a gambeson
or curved heater shields in ether
wood or aluminum.<HR></BLOCKQUOTE>

Email Sent.

Trimariansoldier · Post by **Trimariansoldier** » Wed Jan 22, 2003 11:26 am

These have been sold !
Thanks to all who inquired !

Took an offer that was hard to beat
and helped out a local fighter in the
process.

[This message has been edited by Trimariansoldier (edited 01-22-2003).]