Scrap Titanium CP2 AMS4900K for sale

James C · Post by **James C** » Mon Oct 20, 2003 10:32 pm

I don't really know how to price this but i have 3 sheets of CP2 Ti that i would like to sale. 2 sheets of 13 inch by 36 inch which is .040 and 1 sheet of 13 inch by 30 inch which is .025 inch.

If you are interested contact me with the email in my profile.

Thanks,

Landen

James C · Post by **James C** » Tue Oct 21, 2003 10:06 am

To all those have emailed me and to those that are just curious. They havn't been sold and they will be sold on a first emailed, first served basis.

What is a fair price for scrap Ti?

Oh and .040 = about 18 gauge and .025 is 22 gauge.
*edit*
And when i say scrap it isn't wierd cut pieces it is full rectangles.

[This message has been edited by James C (edited 10-21-2003).]

Jehan de Pelham · Post by **Jehan de Pelham** » Tue Oct 21, 2003 10:24 am

Sell it by weight. I have paid up to $20 a pound for titanium. Not saying that was fair, but I needed the material right away and couldn't dicker. $10 a pound is pretty reasonable, in my opinion. Check ebay and price it nicely in comparison, and it should sell.

Jehan

James C · Post by **James C** » Tue Oct 21, 2003 10:34 am

Alright so be it. It is $10 a pound... now for some way to weigh it.

kenrickb · Post by **kenrickb** » Wed Oct 22, 2003 8:00 am

The big sheets are just over 3lbs each, the small sheet is about 1.6 lbs (based on a density of 4510 kg/m^3)... :-)

Kenrick

James C · Post by **James C** » Thu Oct 23, 2003 9:17 pm

I got some more Ti in. Larger sheets this time. About 15 inches by 50. Still the 0.040 Bout 4.7 lbs

Email me if you want any.

Landen

James C · Post by **James C** » Thu Oct 23, 2003 11:07 pm

Oh i can cut the plates down to size incase you don't want that much.

Thanks,
Landen

mrks · Post by **mrks** » Fri Oct 24, 2003 12:11 pm

hi folks

10 apound is a bargain.

cp2 can be hammer worked without much problem

------------------
sir mrks

tiarmour.com ==>> maker of fine Titanium armour... please note I am not a period armourer I make high tech sport armour using nonperiod materials(titanium) for the type of stick fighting used in the sca.

Gruber · Post by **Gruber** » Tue Oct 28, 2003 2:40 pm

Can it be cut with a B-2??

DanNV · Post by **DanNV** » Tue Oct 28, 2003 3:40 pm

Ok. I purchased a couple of the original sheets offered. Good communication and prompt shipping.

And, FYI, I cut a bit of one just fine with a harbour freight shear, so a b-2 should do just fine.

Dan

James C · Post by **James C** » Thu Nov 06, 2003 10:34 am

I have some on ebay!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2570868047&category=41963&rd=1

Thanks,
Landen

Raibeart Lok De la Haye · Thu Nov 06, 2003 12:47 pm

What gauge is that piece? I don't think the auction says?

James C · Post by **James C** » Thu Nov 06, 2003 12:55 pm

.040 = 18 gauge

I try to get away from using gauge and use more exacting terms. Sorry for any confusion. BTW this is the perfect size piece for a Coat of Plates for an average size person. (6'1" 210lb)

Would anyone be interested in a Coat of Plates Ti kit? It would be just cut and debured plates. I figure $75 for the whole thing.

FYI: I'm trying to sell this to raise money to buy myself some armour from Historic Enterprises.

Sixtus_Goetz · Post by **Sixtus_Goetz** » Sat Nov 08, 2003 7:53 pm

I would be interested. Have a few fighters out here that have serious interest. I would be willing.

Saranac Goetz

jenseny · Post by **jenseny** » Sat Nov 08, 2003 8:43 pm

Sounds cool, but right now I can only afford about one piece of armor a month, and a new helm is more important to me. This offer going to be around for awhile?

James C · Post by **James C** » Sat Nov 08, 2003 8:45 pm

Depths_of_Mind:

Send me an email so we can discuss specifics.

Jenseny:

Yes this will be around for quite a while.

Thanks,

Landen

jean.pierre · Post by **jean.pierre** » Sun Nov 09, 2003 6:45 pm

I'm interested in a COP kit. Lets talk.

James C · Post by **James C** » Sun Nov 09, 2003 8:42 pm

jean.pierre:

Send me an email. It's easier for me to keep up with people that way. And i never know if the email address in the profile is up-to-date.

Thanks,

Landen