RR track anvils

albatros · Post by **albatros** » Fri Jun 29, 2001 8:41 am

How many people here would be interested in such a thing??

the reason I ask is they are replacing some crossings near me and they have the old stuff just lying around. Full sections, I could probably pick one up and get it cut into smaller sections for the price of buying my uncle refills on his ox act. tanks. Any interest?? and what lengths would be the most useful??

------------------
Conrad the Mad

jgalak · Post by **jgalak** » Fri Jun 29, 2001 8:48 am

If you could get them for a low or no cost, and if reasonably priced shipping can be arranged, I'd love a RR track anvil. What I want ideally is about 10-16" long. I could also use a 2-4" one to use as a portable anvil (part of the repair kit).

I'm definitely very interested, please let me know how this develops.

------------------

Yehuda ben Moshe
mka Juliean Galak

Aegiswolf · Post by **Aegiswolf** » Fri Jun 29, 2001 9:33 am

I, too, would be VERY interested in a small (4") one for mobile use as well. I'm tired of jury-rigging on the field. (Last time I used a rock--not pretty)

------------------
-- Dave Larson

muttman · Post by **muttman** » Fri Jun 29, 2001 11:04 am

I might be interested as well, depending on shipping ect. keep us informed when you know more
John

------------------
"and the springfieldians heroicly slaughtered there enemys while they prayed for mercy!"

Gundo · Post by **Gundo** » Fri Jun 29, 2001 11:09 am

I'd like one about two feet long. The shape I'd want might be a little odd compared to other folks. If you're going to really do it, shot me an email, and I'll email you a sketch, and you can shoot me a quote.

------------------
<B>Gundobad,
Wise Ogre Armory
Wise Ogre Pic of the Day
Wise Ogre Armory T-shirts & more</B>

Sanity is very rare. Every man almost, and every woman, has a dash of madness - R.W. Emerson

A position worth taking, is worth defending.

sedric · Post by **sedric** » Fri Jun 29, 2001 1:15 pm

If the shipping is reasonable, I would like a 4"-6" one too.
Could you cut a 4in "horn" on one about 8"-10" long ?

albatros · Post by **albatros** » Fri Jun 29, 2001 1:26 pm

Well I will be on vacation till next weekend and if the are still there I will snatch one or two up. I will post again when I know more.

------------------
Conrad the Mad

Dragon · Post by **Dragon** » Fri Jun 29, 2001 6:21 pm

If you have more tools and time than I.....
http://www.keenjunk.com/sketchbk/jt10521a.htm
This is from keenjunk.com . Anyone recall the location of the other rr track anvil page that is somewhere online?

------------------
My Tools Page

Constancius · Post by **Constancius** » Sat Jun 30, 2001 10:11 am

I'd be interested in one. ABour 2 foot long should do it. Only if the shipping is cheap though. ABout how much do ou think it'll be? Shoot me an e-mail please.

------------------
Constancius of Lincolnshire

animis corporibusque