Rough pigface pics

mshedden · Post by **mshedden** » Wed Jul 04, 2001 2:15 pm

Here's a couple of pictures of the pigface bascinet I've been working on. It still needs a lot of refinement and cleanup. The "ears" still need to be rolled and cut into hinges.

<img src=http://www3.sympatico.ca/alyns/roughpig1.jpg>

<img src=http://www3.sympatico.ca/alyns/roughpig2.jpg>

<img src=http://www3.sympatico.ca/alyns/roughpig3.jpg>

------------------
Michael
http://www.barbute.com/armour

Jean Paul de Sens · Post by **Jean Paul de Sens** » Wed Jul 04, 2001 2:43 pm

Dude, it looks lovely... raising or welding or both or either?

------------------
Jean Paul de Sens (JP)

And Shepherds we shall be
for thee my lord for thee
power hath descended forth from thy hand
so that my feet may swiftly carry out thy command
And we shall flow a river forth unto thee
And teeming with souls shall it ever be
In nomini patriath, fili, espritus sancti.

-The Boondock Saints

suspect · Post by **suspect** » Wed Jul 04, 2001 4:03 pm

what pattern did you use for the helm top and the face

------------------
in hoc signo vince

mshedden · Post by **mshedden** » Wed Jul 04, 2001 6:32 pm

I knew I forgot to mention something.....

The helm itself is welded from 3 pieces.

The visor is raised from a welded cone. I used Cad's pigface pattern from the archive.

The helm pattern was drawn up to fit the clients head.

Now that I have hotworking capabilities I plan on starting to raise helms instead of welding.

------------------
Michael
http://www.barbute.com/armour

suspect · Post by **suspect** » Wed Jul 04, 2001 8:22 pm

mshedden

I have searched for a good hig point bassinet partern for a long time but nobody could give me their pattern. Are you willing to share your? I just need the top part. You can write back to me at dlandry@qc.aira.com to let me know.

It would be appreciated a lot.

thanks.

------------------
in hoc signo vince

Samuel · Post by **Samuel** » Wed Jul 04, 2001 10:42 pm

did you make two halves on the face or bend one peice together and weld the bottom? ( the latter is much easier)

may want to consider taking 3/8 off the top portion of the visor.

looks cool

JJ Shred · Post by **JJ Shred** » Thu Jul 05, 2001 12:21 am

I LIKE IT. Handsome fella, needs some polishing. Good job so far.

------------------
Virtus vincit invidiam
"Virtue overcometh envy"

Clay · Post by **Clay** » Thu Jul 05, 2001 11:21 am

Very cool!

Chuck Davis · Post by **Chuck Davis** » Thu Jul 05, 2001 12:14 pm

Very nice work.

-Cad
Sigh... I need to get back to doing something.