cheap basket hilt relatively

Brennus · Post by **Brennus** » Sat Mar 26, 2005 12:27 pm

They aren't as cheap as the 10 dollar welded hilts but they look alott better. My hilts are 30 dollars plus shipping shipping, depends where you are.

[img]http://home.armourarchive.org/members/brennus/basket.JPG[/img]

See how they look, Murdoch, when I have a decent wooden hammer around.

Sabastian I don't know if you got my last message but the post office needs an exact address to give me an amout for postage.

Brennus · Post by **Brennus** » Sun Mar 27, 2005 8:52 am

I forgot to say I have two of these baskets in stock now in Aluminum. The aluminum ones are as light as the plastic n
baldar hilts and look a times better. I can also make them in Stainless they are slightly heavier but they really polish up nicely.

Karl Helweg · Post by **Karl Helweg** » Mon Mar 28, 2005 8:34 am

Might you be bringing some to Fools' War? I actually have a crop of newbies sprouting right now and one might need a hilt by then.

Brennus · Post by **Brennus** » Mon Mar 28, 2005 9:29 am

I can make a few to bring, any word on how many you might need? I am low on aluminum right now and have a glut of stainless so they might all be stainless.

I now only have one aluminum left in stock anybody out there need it?

Brennus · Post by **Brennus** » Wed Mar 30, 2005 5:10 pm

Ok I have one Aluminum one left and working on a couple of stainless ones. I may even be changing the design slightly. Get in contact if you need one . The best thing about these is if you are wearing a metal half gaunt they look like full gauntlets.

Karl Helweg · Post by **Karl Helweg** » Sat Apr 02, 2005 8:07 pm

All right, this was what I was really looking for. Have any aluminum ones left to bring to Fools' War?

Brennus · Post by **Brennus** » Sat Apr 02, 2005 8:09 pm

I can have ten ready by then

Do you like a larger or smaller basket?

Karl Helweg · Post by **Karl Helweg** » Sun Apr 03, 2005 9:12 am

I'm not sure which size that I need yet. I just need to make a Meridiean "race sword." What I really want is something that I haven't seen in years; a basket hilt that is cut and fluted to look like fingers. These look like period fingered gauntlets with you half gauntlet in them but offer much better protection. Broken fingers just aren't a pilot;'s freind.

Brennus · Post by **Brennus** » Sun Apr 03, 2005 9:59 am

It would be alomost impossible to do that in aluminum its just too brittle for me.

ctopher069 · Post by **ctopher069** » Tue Apr 05, 2005 12:09 pm

i might be intrested inm a couple in aluminum in a couple of weeks. All i used is a welided basket and have never really cared for it. I want something that is a lil lighter. how much would one / both cost with shipping to Granbury TX 76048

thanks

Brennus · Post by **Brennus** » Tue Apr 05, 2005 12:55 pm

one with shipping $35 two with shipping $67

cheap basket hilt relatively

cheap basket hilt relatively

Fools' War

Looking 4

?