gauntPics *fantasywarning*
-
Emoll
- Archive Member
- Posts: 56
- Joined: Thu Feb 28, 2002 2:01 am
- Location: Jordbro, Haninge, Sweden
- Contact:
gauntPics *fantasywarning*
Based on the wisby style fungers, but modified to match a friends drowelf character... its not ment for fighting, (0,7mm) but looks a bit dangerous... (note: his hands are smaller than mine)
http://hem.passagen.se/mummil/h8.jpg
http://hem.passagen.se/mummil/h7.jpg
http://hem.passagen.se/mummil/h6.jpg
http://hem.passagen.se/mummil/h5.jpg
ill suggest to him that he sews them onto gloves... any thougts?
[This message has been edited by Emoll (edited 03-10-2002).]
http://hem.passagen.se/mummil/h8.jpg
http://hem.passagen.se/mummil/h7.jpg
http://hem.passagen.se/mummil/h6.jpg
http://hem.passagen.se/mummil/h5.jpg
ill suggest to him that he sews them onto gloves... any thougts?
[This message has been edited by Emoll (edited 03-10-2002).]
- Aidan Cambel
- Archive Member
- Posts: 3572
- Joined: Thu Jan 04, 2001 2:01 am
- Location: Birmingham, AL , USA
- Rev. George
- Archive Member
- Posts: 8917
- Joined: Thu Aug 17, 2000 1:01 am
- Location: athens. ga usa
- Contact:
-
Guest
- Templar Bob/De Tyre
- Archive Member
- Posts: 5514
- Joined: Wed Aug 23, 2000 1:01 am
- Location: Indianapolis, IN (USA)
Actually, they're rather nice, in a Burgundian-Gothic fusion sort of way. I wouldn't mind having a pair....if they were in Stainless, that is. Well done!
------------------
Robert Coleman, Jr.
The Noble Companie and Order of St. Maurice
<B>Those who beat their swords into plowshares end up plowing for those who don't.
Remember: In Living History/Reinactment, Real Life is the Great Leveler of Man.</B>
------------------
Robert Coleman, Jr.
The Noble Companie and Order of St. Maurice
<B>Those who beat their swords into plowshares end up plowing for those who don't.
Remember: In Living History/Reinactment, Real Life is the Great Leveler of Man.</B>
-
Amalric Unomen
- Archive Member
- Posts: 1300
- Joined: Sat Aug 11, 2001 1:01 am
- Location: Long Beach, CA
-
Konstantin the Red
- Archive Member
- Posts: 26713
- Joined: Sun Oct 21, 2001 1:01 am
- Location: Port Hueneme CA USA
-
Emoll
- Archive Member
- Posts: 56
- Joined: Thu Feb 28, 2002 2:01 am
- Location: Jordbro, Haninge, Sweden
- Contact:
Thanks everyone, now i know they arent totally off...
next ones will be in 1,2mm though...
the fluting is from bending them over an edge and then bending them back, i diskovered it and thought it looked nice...
i agree that longer more narrow cuffs would be nice...
ill think of that if there's a next time...
but how long?
travelagency? im supprised...
well, not much to do about...
//Emoll
next ones will be in 1,2mm though...
the fluting is from bending them over an edge and then bending them back, i diskovered it and thought it looked nice...
i agree that longer more narrow cuffs would be nice...
ill think of that if there's a next time...
but how long?
travelagency? im supprised...
well, not much to do about...
//Emoll
-
Amalric Unomen
- Archive Member
- Posts: 1300
- Joined: Sat Aug 11, 2001 1:01 am
- Location: Long Beach, CA
-
Emoll
- Archive Member
- Posts: 56
- Joined: Thu Feb 28, 2002 2:01 am
- Location: Jordbro, Haninge, Sweden
- Contact:
losthelm: yes, im thinking of lames on the next fingered...
and the material will be heavier as well...
but first ill try doing a mitten gauntlet...
Amalric: do you intend to make them going to or past the elbow? if thers a disching in the end i think ittl limit the movement? or?
Owen: Actually thats me...
and i do woodelf...
Thanks again for all the good comments
and the material will be heavier as well...
but first ill try doing a mitten gauntlet...
Amalric: do you intend to make them going to or past the elbow? if thers a disching in the end i think ittl limit the movement? or?
Owen: Actually thats me...
and i do woodelf...

Thanks again for all the good comments

