Anyone selling a B2 or used tools?

Cop4286 · Post by **Cop4286** » Thu Jun 16, 2005 1:30 am

I am just starting and like most of you in the past do not have the cash to buy everything new. Does anyone have a BEVERLY SHEARS (B2) for sale or know where I can find used tools?
I have no tools yet, so I need the lot!

Thanks

Cet · Post by **Cet** » Thu Jun 16, 2005 9:31 am

I can usually find a B-2 or B-1 for around $350 given a little bit of searching. Typically in the $350-$400 price range. I also have a small supply of whitney #7 and #8 punches available as well as some of the more common pexto stakes, (squares and hatchets mostly).

The punches usually run around $100 and the stakes about $50-$60.

Of course, this is all hjeavy stuff and shipping is aditional so that can tack on a good bit.

If your interested send me an e-mail to the address in my profile.

Ceramite · Post by **Ceramite** » Thu Jun 16, 2005 1:35 pm

I got lucky and found a used b2 for 300 bucks, i searched the web till one day i found a company having a going out of business sale. God Bless Google. (there is always ebay too)

horsefriend · Post by **horsefriend** » Mon Jun 20, 2005 1:43 am

I've got an extra #8 that I don't need, has a .25" punch. I'd let it go for $50 plus shipping. I may also have a B-1 I don't need, I'll know in a few days.

a/s

Jacob · Post by **Jacob** » Mon Jun 20, 2005 2:29 pm

horsefriend, let me know the condition of the #8 and punch. I'd be interested if Cop4286 is not. The #8 is overkill for armouring but would be good for blacksmithing.

A shipping estimate to 22151 (ground or whatever's cheap) would be nice.

I may be interested in the B1 if it's a good deal. I've got a used B3 but the blade adjustment is still stuck and it doesn't do sharp turns. I have wedding expenses to balance, though.

horsefriend · Post by **horsefriend** » Wed Jun 22, 2005 10:39 am

Jacob,

The punch is in good shape except for a (very) small amount of damage tio the base of the belly(looks like someone had welded on a bench mounting flange and then cut it off. The #8 weighs about 15 lbs., so shipping would be approximately $25. Sell you the punch for $65 including shipping.

a/s

Sigeric · Post by **Sigeric** » Wed Jun 22, 2005 11:09 am

I did a little web searching and found a used B2... no idea what they want for it...

http://sheetmetalequipment.com/pages/us ... vb2sw.html

Just thought I would share what I found.
Sigeric