Doin the happy armourer dance!

Prince Of Darkmoor · Post by **Prince Of Darkmoor** » Mon Aug 26, 2002 11:17 am

Our B3 we bought from Pheylin came in via FedEx on Saturday

Man is this thing a monster! It dwarfs the B2 in size and is at least 15lbs heavier. I'm sure the FedEx man was a little stunned to see two large bald men racing down the driveway to greet him.

After mounting it, the first thing we did was slice a piece of 12ga stainless. It's scary how easy that was. This means that 10 and 12ga stainless shield bosses and helmet tops are coming soon...

Owain Cadarn · Post by **Owain Cadarn** » Mon Aug 26, 2002 11:26 am

I hungrily await your new projects

oCd

Stephen · Post by **Stephen** » Mon Aug 26, 2002 12:33 pm

"after mounting it" Ya know I would probably pay to see that!

Best of luck with it!

Xanthier · Post by **Xanthier** » Mon Aug 26, 2002 12:39 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Stephen:
"after mounting it" Ya know I would probably pay to see that!
<HR></BLOCKQUOTE>

The PoD must show his dominance over the new shear!

Pheylin Quinn · Post by **Pheylin Quinn** » Mon Aug 26, 2002 12:57 pm

Mounting your B-3 is SOOOO much more fun than using it.

I mounted mine over and over again. Until I got it just right.

Don't worry. I cleaned it off real good before shipping it out to PoD. Hope I did not miss a spot.

Glad your happy. It is in SWEET shape and I was sorry to see it go. However, I did not have a need for it. It sat in the corner collecting dust and that was just shameful of me.

[This message has been edited by Pheylin Quinn (edited 08-26-2002).]

Lion du Fay · Post by **Lion du Fay** » Mon Aug 26, 2002 3:38 pm

Klangiron Skullthumpa · Mon Aug 26, 2002 6:40 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Pheylin Quinn:
[B]
I mounted mine over and over again. Until I got it just right.

Don't worry. I cleaned it off real good before shipping it out to PoD. Hope I did not miss a spot.

B]<HR></BLOCKQUOTE>

ewwwwwwww that's just sooo not right

Prince Of Darkmoor · Post by **Prince Of Darkmoor** » Mon Aug 26, 2002 6:52 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Pheylin Quinn:
Mounting your B-3 is SOOOO much more fun than using it.

I mounted mine over and over again. Until I got it just right.

Don't worry. I cleaned it off real good before shipping it out to PoD. Hope I did not miss a spot.
<HR></BLOCKQUOTE>

Man...I knew that wasn't machine oil on the blades!

And next time you're mounting your shear, be careful not to let the handle slip and cut something off...

On a similarly perverted note, ever notice that the mounting holes for the B2, B3, and even the cheap B1 knockoff are all in the same place? No matter what shear you're mounting, you never have to make new holes.

[This message has been edited by Prince Of Darkmoor (edited 08-26-2002).]

Pheylin Quinn · Post by **Pheylin Quinn** » Mon Aug 26, 2002 10:39 pm

There is nothing worse than mounting her and finding the holes are in a different place.

Engenulf · Post by **Engenulf** » Tue Aug 27, 2002 2:23 am

You guys are sooo naughty!! you are all going to heck and will spend a lukewarm eternity with Senior Diablo for your naughtyness!!!

Konstantin the Red · Post by **Konstantin the Red** » Tue Aug 27, 2002 3:16 am

<BLOCKQUOTE>quote:<HR>Originally posted by ENGENULF:

You guys are sooo naughty!! you are all going to heck and will spend a lukewarm eternity with Senior Diablo for your naughtyness!!!

<HR></BLOCKQUOTE>

Being prodded on the hiney with wooden spoons no doubt!

Drake Orion · Post by **Drake Orion** » Tue Aug 27, 2002 6:31 am

or egg beater...

Melee · Post by **Melee** » Tue Aug 27, 2002 2:52 pm

Ya when i went in a fabricators workshop, when i was getting my patterns cut, i saw my first b3 it was huge and had a three foot leaver. I asked if i can cut some scrap on it, he said "shure, go nuts" ANd i took a hefty piece of what i thought was steel and cliped it. Like a warm knife through butter. And that was my first time seeing and useing a b3 beverly shear. It was awsome. Simply awsome. I want one.

Pheylin Quinn · Post by **Pheylin Quinn** » Tue Aug 27, 2002 3:02 pm

The only problem with the B-3 is that it's use is limitted, in an armoury.

Sure, it's heavy duty, sure it's big and heavy and cool.

However, it does not have a very good turning radius. This leaves you with only cutting large rounds and straighter edges.

For what they do, they do it well, though.

Sebastian K · Post by **Sebastian K** » Tue Aug 27, 2002 3:28 pm

<BLOCKQUOTE>quote:<HR>Originally posted by ENGENULF:

You guys are sooo naughty!! you are all going to heck and will spend a lukewarm eternity with Senior Diablo for your naughtyness!!!

<HR></BLOCKQUOTE>

Ach,

Billy Joel said it best:

"I'd rather laugh with the sinners than cry with the saints"

Have fun, Clay

Sebastian