Plasma cutter promo...

Patrick Sain · Post by **Patrick Sain** » Thu Sep 05, 2002 6:36 pm

I'm sure this will really mess with the odds of winning but..

http://www.millerwelds.com/main/promotions/

I'm also sure I'm not the only one who can afford "free."

------------------
Been there; Done that; Made the hauberk.

Armored Dillo Highway/Knitting Steel:Guide for the Contemporary Maille Craftsman

Pheylin Quinn · Post by **Pheylin Quinn** » Thu Sep 05, 2002 7:47 pm

WOOHOO!!

I'm gonna wiiiin!
I'm gonna wiiiin!
I'm gonna wiiiin!
I'm gonna wiiiin!

Galileo · Post by **Galileo** » Thu Sep 05, 2002 8:24 pm

Nope, <color=red>I'm</color> gonna win!

G--

------------------
A PBS mind in an MTV world.

[This message has been edited by Galileo (edited 09-05-2002).]

Alcyoneus · Post by **Alcyoneus** » Thu Sep 05, 2002 9:05 pm

Feh. I am.

Morgan · Post by **Morgan** » Thu Sep 05, 2002 10:21 pm

Blah...it's gonna be someone who doesn't even MAKE armour...like...

ME!

Ivar · Post by **Ivar** » Thu Sep 05, 2002 11:02 pm

I HAVE this plasma cutter-- it ain't all that... believe me. I can cut a 12 stainless helm top faster on the B3 than with this.

Patrick Sain · Post by **Patrick Sain** » Fri Sep 06, 2002 12:56 am

<BLOCKQUOTE>quote:<HR>Originally posted by Ivar:
I HAVE this plasma cutter-- it ain't all that... believe me. I can cut a 12 stainless helm top faster on the B3 than with this. <HR></BLOCKQUOTE>

Be that as it may, you could always unload it on ebay and buy supplies or other useful tools...

------------------
Been there; Done that; Made the hauberk.

Armored Dillo Highway/Knitting Steel:Guide for the Contemporary Maille Craftsman

Conrad the Mad · Post by **Conrad the Mad** » Fri Sep 06, 2002 8:34 am

<BLOCKQUOTE>quote:<HR>Originally posted by Ivar:
I HAVE this plasma cutter-- it ain't all that... believe me. I can cut a 12 stainless helm top faster on the B3 than with this. <HR></BLOCKQUOTE>

Ill bet its better than trying to cut stainless with a jigsaw! Cant afford a b3,b2,or, b1 so this is the ticket!

Pheylin Quinn · Post by **Pheylin Quinn** » Fri Sep 06, 2002 9:53 am

You all suck. I am going to win. You had better just bot out now and save yourselves the shame and suffering.

Don't care if it works or not. I just want a plasma cutter. Hell, don't care if it'll only melt butter. Gimmeee, gimmeee, gimmeee.

My PRECIOUSSSSSSSSSSSSSS!

Jacob · Post by **Jacob** » Fri Sep 06, 2002 11:36 am

It's not ideal for cutting out armour pieces unless you have a really steady hand. However, It's just what you need to cut out intricate things like complex leaves or heavy things if you dont have a OA torch. I used one for cutting out parts for stakes, but had to use the OA for cutting out a stake plate. They're great tools for some things, but not the best if you only need to cut out helms, etc. Even though it's free, you still need to buy an air compressor. It's a great deal though. It'd be cool if someone here won.

Steve S. · Post by **Steve S.** » Fri Sep 06, 2002 11:38 am

Now I am going to win, too.

Steve

------------------
Forth Armoury
Highly authentic, affordable riveted maille.

sarnac · Post by **sarnac** » Fri Sep 06, 2002 11:42 am

By ROYAL DECREE

...............it's mine!!!!!!!!!!!!!!

Klangiron Skullthumpa · Fri Sep 06, 2002 12:33 pm

I hate to burst the bubbles of all you poor, deluded foolish hammermonkeys but ..

That thing is MINE

trebor · Post by **trebor** » Fri Sep 06, 2002 12:51 pm

Ivar can I have your plasma cutter?

Drake Orion · Post by **Drake Orion** » Fri Sep 06, 2002 1:41 pm

what is a plasma cutter?

Hawk · Post by **Hawk** » Fri Sep 06, 2002 2:48 pm

What is a Plasma Cutter?
http://www.millerwelds.com/main/education/

Steve S. · Post by **Steve S.** » Fri Sep 06, 2002 3:26 pm

"what is a plasma cutter?"

It's a toy that I'm going to win!

Steve

------------------
Forth Armoury
Highly authentic, affordable riveted maille.

Templar Bob/De Tyre · Post by **Templar Bob/De Tyre** » Fri Sep 06, 2002 3:30 pm

...yeah, right..keep dreaming.

It's mine; mine, I tell ya!!! Mwahahahahah!!!!

------------------
Robert Coleman, Jr.

The Noble Companie and Order of St. Maurice
Those who beat their swords into plowshares end up plowing for those who don't.

Remember: In Living History/Reinactment, Real Life is the Great Leveler of Man.

[This message has been edited by Templar Bob/De Tyre (edited 09-06-2002).]

j t · Post by **j t** » Fri Sep 06, 2002 3:49 pm

Gundo · Post by **Gundo** » Fri Sep 06, 2002 5:07 pm

Nope. Mine. But you can bid on it on ebay.

------------------
Gundobad,
Wise Ogre Armory

"Always be seeking deeds of arms - DeCharney"

A position worth taking, is worth defending.

Christopher Anselm · Post by **Christopher Anselm** » Tue Sep 10, 2002 6:29 pm

I have a compressor and am ready to get it!

berok · Post by **berok** » Wed Sep 11, 2002 7:19 am

I just registered and will be picking up my new plasma cutter in a few days or so hehehehe

just think of all the cutouts I could do with this baby

------------------
Il hel!!! to the halls of valhalla we go where we fight all day drink all evening and.....well let's just say it gets better from there =)

ToolGoon · Post by **ToolGoon** » Wed Sep 11, 2002 7:39 am

It's a shame that everyone's made such a big deal out of a dumb old promotion that no one except me! is going to win. Eh hem. 'Scuse me.

Ben

------------------
Ben Schenkman
Order of Selohaar
http://www.selohaar.org/phoenixforge/

WaaaghBoss · Post by **WaaaghBoss** » Wed Sep 11, 2002 8:32 am

Ta ya what, once i have MY NEW PLASMA CUTTER, any AA member can come to Chicago anytime you want and use it. You just have to teach me something about armor while here!
:-)

Mad Matt · Post by **Mad Matt** » Wed Sep 11, 2002 9:38 am

So you guys do know that you need an air compressor to run a plasma cutter.

You also need one of those thingies that takes all the moisture out of the air.

Since I just bought a compressor I think it should be mine since it'll have the friend it needs.

------------------
The budding mid 14th century German Transitional guy.
Mad Matt's Armory

Ivar · Post by **Ivar** » Wed Sep 11, 2002 9:11 pm

OK, I need money-- I'll sell my plasma cutter. I have this model:

http://millerwelds.com/main/products/plasma/M14600/

and it's hardly used. Its a step down from the one in the "give away". First $850 takes it, and saves heart ache of NOT winning one from Miller.

Email me if you are interested.

------------------
Ivar Bloodhand, Norsetrader Arms
http://www.valhallaleather.com
Official distributor for Ron Simmons and "Rough From the Hammer"

"I got a sweater for Christmas... I wanted a screamer or a moaner"

Pheylin Quinn · Post by **Pheylin Quinn** » Wed Sep 11, 2002 9:25 pm

<BLOCKQUOTE>quote:<HR>Originally posted by WaaaghBoss:
Ta ya what, once i have MY NEW PLASMA CUTTER, any AA member can come to Chicago anytime you want and use it. You just have to teach me something about armor while here!
:-)

<HR></BLOCKQUOTE>

Everyone knows that Unix freaks suck at using power tools. Therefore, it should be mine if it is to reside in the Chi-town area.

You know it is true, let it go. Let it go, man.

Patrick Sain · Post by **Patrick Sain** » Mon Sep 16, 2002 10:57 am

Bummer...

They gave it away to to the correct city, but they seriously got the wrong person.

------------------
Been there; Done that; Made the hauberk.

Armored Dillo Highway/Knitting Steel:Guide for the Contemporary Maille Craftsman

Ivar · Post by **Ivar** » Mon Sep 16, 2002 11:18 am

Oh well... you can still buy mine...

hogan · Post by **hogan** » Tue Sep 17, 2002 12:17 am

Ok, where did you find the link that listed who won? I went back to the link up top but it's a new promo.