Lamella plates?

DAVID01 · Post by **DAVID01** » Mon Nov 06, 2006 10:45 am

Could someone tell me what the most sought after Lamella plates are and the specs? I have a Nephew in law who has just purchased a plasma cutter and wants to make and sell them if it would be profitable. He has been doing a little custom Bike fabricating and needs to have something else to help keep his shop going. If anyone could give a few hints of something that would sell good here let me know and I'll pass it on to him.

Thanks

Sean Powell · Post by **Sean Powell** » Mon Nov 06, 2006 1:24 pm

Plasma cutter or CNC plasma cutter? It makes a difference.

If he can CNC according to CAD files I may have some work I could send him. If he can plasma cut by tracing cardboard I may also have some stuff I could send him but not much.

If he wants to rip sheets into tiny identical squares he's going to find that presses make a more economical solution for lamelar.

I think it was "Armor from the battle of Wisby" that had a picture showing different lamellar plates and their rough dimensions. I'm sure someone around here has a scan of it.

Good luck,
Sean

DAVID01 · Post by **DAVID01** » Tue Nov 07, 2006 7:12 am

Thanks Sean,
I'll check with him and find out for sure then get back with you.

Thanks again,
David

Tatsuo Okami · Post by **Tatsuo Okami** » Wed Nov 08, 2006 11:06 am

PLEASE

remember to tell your nephew to take everything as references and make his own Specific shape. Unless he has permission from the creator to "Copy For Commercial Reproduction". Even if he has to change the width and heighth by an 1/4 to 3/8 of one he really likes... It will save legal and reputation problems.

Oswyn_de_Wulferton · Post by **Oswyn_de_Wulferton** » Wed Nov 08, 2006 1:28 pm

The creator that made the original plates? Like several hundred years ago? Or are you talking reproducing modern lamellar?

Rev. George · Post by **Rev. George** » Wed Nov 08, 2006 5:37 pm

Hell, I got cad files of several types... If he wants them let me know.

-+G

DAVID01 · Post by **DAVID01** » Thu Nov 09, 2006 11:12 am

Hello all and thanks too you all for the feedback. Yes, his cutter is CNC and we would love to have ANY and all the patterns that would be okay for him to use.

Rev. We would love to have the files, thank you.

Chad is trying to get set up to do custom bikes and would appreciate any work that would help him get started. I have seen some custom bike parts he is making and I think some of you bikers would be interested in checking with him. He hasn't got a web page yet but he's working on it.

Anyone interested in something just contact me and I will make sure he gets the message. My new email here in Johnstown (I moved from Okla) is GloryDaze54@atlanticbb.net

Thanks again to all of you :wink:

David

DAVID01 · Post by **DAVID01** » Mon Nov 13, 2006 10:15 am

We're still interested in a good pattern that would benifit many, could someone tell us the most popular lamella pattern.

Animal, still waiting for your pattern.

Oswyn_de_Wulferton, we want to cut a pattern that would be profitable for him. Be it several hundred years ago or modern.

Rev. George, He would love to have the CAD files you spoke of,Thank you.

Tatsuo Okami, We will definitly keep it right. We wouldn't want to encroach on anyone.Thanks

And again, thanks to all of you.

David01

Sean Powell, I'm not sure what cutting according to CAD files means But if you could contact us with info we'd appreciate it. This is something I would like to see him get into. Thank you Sean

DELETEMYACCOUNT · Post by **DELETEMYACCOUNT** » Mon Nov 13, 2006 11:06 am

Sorry mate, migraine issues lately, I'll get it to you, promise.

DELETEMYACCOUNT · Post by **DELETEMYACCOUNT** » Mon Nov 13, 2006 1:54 pm

This is the shape I was talking about and the hole pattern as well. From what I can tell it's a lot more mongolian than the other stuff commercially available. Find out if he'd be into doing these and I'll get the dimensions.
Thanks mate!

Oswyn_de_Wulferton · Post by **Oswyn_de_Wulferton** » Mon Nov 13, 2006 2:43 pm

Sorry for the misunderstanding, David. I was talking to Tatsuo, when I asked about copying accurate plates.

Rev. George · Post by **Rev. George** » Mon Nov 13, 2006 3:18 pm

David- What forn do you want them, in? I can do DWG, DXF, or anything else that autocad 2K can do.

-+G

DAVID01 · Post by **DAVID01** » Tue Nov 14, 2006 11:37 am

Animal,
Go ahead and send the dimensions and what you want them made of. I'll take it to him and get back with you.

Rev.
I'm not that computer literate, so I'm not understanding what you mean.

Rev. George · Post by **Rev. George** » Wed Nov 15, 2006 4:33 pm

well drawings done on comupter are usually doen with a drafting program like AutoCAD or ProE, or what not. Those drawings are saved as computer files, in a varirty of formats, like DWG, DXF, ETC. Your brothers machine will likely prefer one or the other.

-+G

DAVID01 · Post by **DAVID01** » Thu Nov 16, 2006 12:42 pm

Rev. George wrote:well drawings done on comupter are usually doen with a drafting program like AutoCAD or ProE, or what not. Those drawings are saved as computer files, in a varirty of formats, like DWG, DXF, ETC. Your brothers machine will likely prefer one or the other.

-+G

Thanks Rev. Guess I should have just asked him. :oops:

Lamella plates?

Lamella plates?

Commercial products