shield clamps thingys

bigjon · Post by **bigjon** » Tue Jan 09, 2007 12:54 pm

I'm wondering if there is anyone out there who might sell or could make the metal gutter sheild clamps to hold down shield edges, like the vals series of shields?

Cat · Post by **Cat** » Tue Jan 09, 2007 1:35 pm

Well, I've never made them before, but if you don't find someone who can help you, I could give it a try. I have some brass that's like 22 gauge, but the only steel I have is about 16 gauge and it's galvy, so I would have to soak the pieces for a few days to remove that.

Lemme know,
Cat

Scott · Post by **Scott** » Tue Jan 09, 2007 3:44 pm

I just use small lengths of pallet banding. Bend them into a U, punch holes in the ends, put them on the shield and drill through the holes and through the shield, and then rivet them on.

- Scott

Sir Thorfinn · Post by **Sir Thorfinn** » Wed Jan 10, 2007 11:12 am

Hey John,
I have made these before, I can shoot you some pictures, but to be honest, you can do it also...its crazy-easy.
Shoot me an email if you'd like some pics or directions.

Sir Thorfinn

PS: hey Cat, I can forward pics to you too if you'd like, I think these would be a great addition to the goodies you make...