Chainmail Update

Duke Icefalcon · Post by **Duke Icefalcon** » Thu Jun 12, 2008 8:55 am

The current shipment of maille is in JFK awaiting customs clearance. I should have it in my hands by next week and will ship out all of the orders I can fill from it right away.

If someone would like to place an order for 6mm or mild steel items, now is the time. I will let you know if I have/will have it in stock by next week and will ship right away.

www.icefalcon.com

Duke Icefalcon · Post by **Duke Icefalcon** » Mon Jun 16, 2008 8:17 am

As of this morning, the chain is still in customs. I have been told that it is likely to clear today and be delivered to me tomorrow. If that is the case, I will start sending tomorrow and Wednesday.

I will keep you all posted.

Ice

Duke Icefalcon · Post by **Duke Icefalcon** » Mon Jun 16, 2008 10:00 am

Just got the call that the shipment has been cleared through customs. I will give an ETA on shipping as soon as I get one.

Ice

Aaron · Post by **Aaron** » Mon Jun 16, 2008 10:18 am

Yeah!

I'll have my armpits protected soon...so as soon as my wife can fight regularly, I can fight without people looking at my armpit hair.
-Aaron

RoaK · Post by **RoaK** » Mon Jun 16, 2008 12:17 pm

Question: do your voiders cover the entire arm or just the inside around the arm pit? Also if they cover the whole arm what length are they? Full sleeve or half sleeve?

I'm looking for voiders that cover the arms all around...

Wolf · Post by **Wolf** » Mon Jun 16, 2008 12:37 pm

u will need to buy a long sleeve hauberk for that. i know of NO ONE that sells what you are looking for. traditional voiders cover the inside of the arms and the arm pit area. where the plate would not cover due to inner articulation. JeffJ has complete shoulder area plus voiders on his set, but i believe he made them from an exsisting shirt and cut it down.

chef de chambre · Post by **chef de chambre** » Mon Jun 16, 2008 2:22 pm

A 15th century text (perhaps the first Johannes Hill text onm 'How a Man schall be armed" - there were two different ones written), recommends voiders extend no father than two finger width under the edge of the plate.

Duke Icefalcon · Post by **Duke Icefalcon** » Mon Jun 16, 2008 2:43 pm

RoaK wrote:Question: do your voiders cover the entire arm or just the inside around the arm pit? Also if they cover the whole arm what length are they? Full sleeve or half sleeve?

I'm looking for voiders that cover the arms all around...

Typical voider pattern is under the arm, halfway down the body and halfway down the arm.

This is what we have.

Cheers!

Duke Icefalcon · Post by **Duke Icefalcon** » Mon Jun 16, 2008 3:00 pm

Shipper says that they are going to deliver to me tomorrow. I will start packing boxes tomorrow then.

Aaron · Post by **Aaron** » Mon Jun 16, 2008 3:14 pm

Did you just say you HAVE the voiders? I'm really, really looking forward to this!

-Aaron

Duke Icefalcon · Post by **Duke Icefalcon** » Mon Jun 16, 2008 3:45 pm

Aaron,

This shipment is mostly mild and 6mm. Your voiders will be coming with the stainless items getting sent at the end of the month.

Sorry for the wait, my friend.

Ice

Aaron · Post by **Aaron** » Mon Jun 16, 2008 3:52 pm

Bummer.

Oh, well, it's worth the wait. And it allows me to stew in anticipation...

-Aaron

Duke Icefalcon · Post by **Duke Icefalcon** » Tue Jun 17, 2008 3:26 pm

The second of 3 shipments is in. It just got here. I will begin inventory and then I will be shipping orders tomorrow.

Drop me a line if you want something in mild or 6mm right away.

Ice

Sixtus_Goetz · Post by **Sixtus_Goetz** » Tue Jun 17, 2008 6:39 pm

Going by this statement, Syr Finn's and my stuff wasn't in this shipment eh?

Duke Icefalcon · Post by **Duke Icefalcon** » Tue Jun 17, 2008 7:05 pm

That is incorrect. Your haubergeon is in, good sir...

So is Sir Finn's.

I did get an odd lot of stainless goods but the bulk of the stainless gear is coming in at the end of the month.

If you give me a call tonight, I will ship it to you tomorrow.

Cheers!

Ice

Sixtus_Goetz · Post by **Sixtus_Goetz** » Tue Jun 17, 2008 11:10 pm

Sorry I wasn't able to get in touch with you tonight.. fighter practice and all ... but YAY !!!!!!

I'm pm'ing you with some info though

Syrfinn · Post by **Syrfinn** » Tue Jun 17, 2008 11:47 pm

Great to hear. Now just hoping Post Office is speedy, and I get it by Friday, for our Rose Tourney on Saturday. If not, at least will have it for the next weekend. :p

Thanks your Grace, looking forward to the shirt.

Sixtus_Goetz · Post by **Sixtus_Goetz** » Wed Jun 18, 2008 9:38 am

Your Grace,

Were you able to find my on-line order?

Cheers

Jeff J · Post by **Jeff J** » Wed Jun 18, 2008 10:21 am

I'd like to take a look at the 6mm riveted. Will there be anyone selling at the Storvic unbelt tourney in July?

Duke Icefalcon · Post by **Duke Icefalcon** » Thu Jun 19, 2008 7:06 am

Sixtus_Goetz wrote:Your Grace,

Were you able to find my on-line order?

Cheers

Sixtus,

Yes, your gear is in the mail. Sorry for the confusion. I do not know all of the SCA names with the modern names and we had a ton of orders.

Let me know how you like it,

Ice

Duke Icefalcon · Post by **Duke Icefalcon** » Thu Jun 19, 2008 7:07 am

Jeff J wrote:I'd like to take a look at the 6mm riveted. Will there be anyone selling at the Storvic unbelt tourney in July?

Not likely but we can bring some to East Kingdom War Camp in July. We often get a lot of Atlantians at that event as it is not too far a trip for some.

I will also bring much of this to Pennsic.

Ice

Sixtus_Goetz · Post by **Sixtus_Goetz** » Thu Jun 19, 2008 8:19 am

Totally understandable. I'll post a review once I get everything sorted with it

looking forward to it.

Duke Icefalcon wrote:
Sixtus_Goetz wrote:Your Grace,

Were you able to find my on-line order?

Cheers

Sixtus,

Yes, your gear is in the mail. Sorry for the confusion. I do not know all of the SCA names with the modern names and we had a ton of orders.

Let me know how you like it,

Ice

Proxus · Post by **Proxus** » Thu Jun 19, 2008 2:02 pm

Your Grace,

I noticed today the pending charge on my card for the balance of the stainless chain I had ordered. Is that an indication that order was among the odd assortment of stainless items received? If so once it ships would you be kind enough to either PM or email me with tracking information?

Thank you very much and have a wonderful day!

:!:

(awaiting with breathless anticipation) :lol:

mka Brad Kelly

Duke Icefalcon · Post by **Duke Icefalcon** » Thu Jun 19, 2008 2:17 pm

Proxus,

Your gear is shipped. Ity went out priority mail, insured. No tracking number but you should have it within 3-4 business days.

Enjoy!

Proxus · Post by **Proxus** » Mon Jun 23, 2008 6:00 pm

YAY,,,, Christmas in June.

The chain arrived. I felt sorry for the poor little Vietnamese postal lady that was lugging the box into my corporate office. I took it off her hands as soon as I saw her. Thank you sir for the constant and professional replies and communication while awaiting customs and shipping on your end. As soon as I get a chance to wear it in practice I will be posting a review. (Tomorrow night!! yay).

Todd R. · Post by **Todd R.** » Tue Jun 24, 2008 7:28 am

Your Grace,

What size rivets are used in the chainmail? The reason I ask is I have a rivet missing from one of my links and I need to replace it.

Thanks,

Todd

Wolf · Post by **Wolf** » Tue Jun 24, 2008 7:32 am

hey i got my voiders, very nice. just gotta get the grease off then i can sew it to my arming jacket!!!

Aaron · Post by **Aaron** » Tue Jun 24, 2008 7:57 am

Ooooo...voiders! Did my stainless voiders come in?

Mild wouldn't do it. I sweat BUCKETS (as you know) and that's not good for mild.

-Aaron

Josh W · Post by **Josh W** » Tue Jun 24, 2008 8:26 am

The voiders came in? :shock:

How did I miss that?

Duke Icefalcon · Post by **Duke Icefalcon** » Tue Jun 24, 2008 8:48 am

Todd R. wrote:Your Grace,

What size rivets are used in the chainmail? The reason I ask is I have a rivet missing from one of my links and I need to replace it.

Thanks,

Todd

Todd,

Send me an email with the address you want me tosend it to and I will do so. Let me know whatthe material was as well when you send it to me. (stainless, mild, 6mm)

icefalcon@comcast.net

Duke Icefalcon · Post by **Duke Icefalcon** » Tue Jun 24, 2008 8:49 am

The stainless and 6mm voiders are not in yet.

svonbaden · Post by **svonbaden** » Tue Jun 24, 2008 8:59 am

I didn't know anyone even sold voiders! This is great news.

Duke Icefalcon · Post by **Duke Icefalcon** » Tue Jun 24, 2008 9:43 am

svonbaden wrote:I didn't know anyone even sold voiders! This is great news.

We have mild in stock and stainless and 6mm on the way by the end of the month. Ordernow if you would like to get in on the shipment.

www.icefalcon.com

Aaron · Post by **Aaron** » Tue Jun 24, 2008 10:36 am

Voiders...I'm saying it like Homer Simpson says doughnuts (and almost the drool).

-Aaron

Chainmail Update

Chainmail Update

Stainless Chain

YAY GOT IT