Melted beeswax - what can I use for a mold?

This forum is designed to help us spread the knowledge of armouring.
Post Reply
Cat
Archive Member
Posts: 3489
Joined: Tue Mar 30, 2004 12:18 pm
Location: Columbus, Ohio
Contact:

Melted beeswax - what can I use for a mold?

Post by Cat »

Hey guys,
I need to line something with melted beeswax, and I was wondering what to pour the extra into when I'm done. I tried pouring some in a plastic tupperware container, but it stuck to it. If I line the tupperware with waxed paper, will the hardened beeswax pop back out, or will it stick to that too?

I don't need anything decorative, I just need something to pour the remainder in until it hardens, and then be able to get it back out easily.

Thanks,
Cat
Catherine's Quest is no longer in business. I may open back up at some point in the future. Thank you all for all of your support over these last few years. It has meant the world to me.
User avatar
InsaneIrish
SQUEEE!
Posts: 18252
Joined: Thu Aug 10, 2000 1:01 am
Location: Jefferson City Mo. USA

Post by InsaneIrish »

cupcake pan.

makes nice easily retreivable pucks of wax.
Insane Irish

Quote: "Nissan Maxima"
(on Pennsic) I know that movie. It is the 13th warrior. A bunch of guys in armour that doesn't match itself or anybody elses, go on a trip and argue and get drunk and get laid and then fight Tuchux.
Kilkenny
Archive Member
Posts: 12021
Joined: Sun Oct 06, 2002 1:01 am
Location: NJ
Contact:

Re: Melted beeswax - what can I use for a mold?

Post by Kilkenny »

Cat wrote:Hey guys,
I need to line something with melted beeswax, and I was wondering what to pour the extra into when I'm done. I tried pouring some in a plastic tupperware container, but it stuck to it. If I line the tupperware with waxed paper, will the hardened beeswax pop back out, or will it stick to that too?

I don't need anything decorative, I just need something to pour the remainder in until it hardens, and then be able to get it back out easily.

Thanks,
Cat


The tupperware should work. If the wax isn't coming out easily, stick it in the freezer for a few minutes. The wax should contract a bit and come right out for you.
Gavin Kilkenny
Proprietor
Noble Lion Leather
hardened leather armour and sundry leather goods
www.noblelionleather.com
Cat
Archive Member
Posts: 3489
Joined: Tue Mar 30, 2004 12:18 pm
Location: Columbus, Ohio
Contact:

Post by Cat »

Thanks guys! The freezer trick worked perfectly! After a few minutes in the freezer, it popped right out. Now I will have to try the cupcake pan. That would be a good size to use for a small amount of wax.

Thanks again,
Cat
Catherine's Quest is no longer in business. I may open back up at some point in the future. Thank you all for all of your support over these last few years. It has meant the world to me.
Diglach Mac Cein
Archive Member
Posts: 14071
Joined: Sun Oct 28, 2001 1:01 am

Post by Diglach Mac Cein »

Silicone cupcake pan - not real expensive (found mine at the local $1 store) - works like a dream.
McCein Leatherworks and Sutlery - Used / refurbished armor, leatherworks, and accessories -

Check out my FB Page -
User avatar
Lorenz De Thornham
Archive Member
Posts: 1128
Joined: Sun Mar 16, 2008 5:12 pm

Post by Lorenz De Thornham »

Simplest and oldest, just dust it with talcum powder.
Cat
Archive Member
Posts: 3489
Joined: Tue Mar 30, 2004 12:18 pm
Location: Columbus, Ohio
Contact:

Post by Cat »

Thanks guys! All good suggestions!
Cat
Catherine's Quest is no longer in business. I may open back up at some point in the future. Thank you all for all of your support over these last few years. It has meant the world to me.
Post Reply