This forum is designed to help us spread the knowledge of armouring.
-
Jiri Lucius.
- Archive Member
- Posts: 844
- Joined: Wed Mar 12, 2003 2:01 am
- Location: Czech Republic
-
Contact:
Post
by Jiri Lucius. »
[img]http://www.volny.cz/luciusj/pic/Mike.JPG[/img]
[img]http://www.volny.cz/luciusj/pic/Mike1.JPG[/img]
[img]http://www.volny.cz/luciusj/pic/Mike2.JPG[/img]
Armoury Lucifer
-
Lubeck
- Archive Member
- Posts: 108
- Joined: Mon Aug 20, 2001 1:01 am
- Location: Cleveland Ohio
Post
by Lubeck »
Very nice work, What's the gauge?
-
Jiri Lucius.
- Archive Member
- Posts: 844
- Joined: Wed Mar 12, 2003 2:01 am
- Location: Czech Republic
-
Contact:
Post
by Jiri Lucius. »
Thanks,
finger scales 18ga (1,3mm),and the rest is from 16ga (1,5mm)
Jiri
Armoury Lucifer
-
Gaudeamus
- Archive Member
- Posts: 77
- Joined: Sat Jun 08, 2002 1:01 am
Post
by Gaudeamus »
I like that cone at the pivot of the wrist you put there. Is that historical or is that a personal touch?
-
Drake Orion
- Archive Member
- Posts: 1521
- Joined: Thu Aug 10, 2000 1:01 am
- Location: Warminster, Pa.
-
Contact:
Post
by Drake Orion »
Wow...nice
-
Jiri Lucius.
- Archive Member
- Posts: 844
- Joined: Wed Mar 12, 2003 2:01 am
- Location: Czech Republic
-
Contact:
Post
by Jiri Lucius. »
The cone at the pivot point on the wrist is historical but i think it was not as big as I made it on these gauntlets.
Jiri
-
Halberds
- Archive Member
- Posts: 20444
- Joined: Sat Oct 13, 2001 1:01 am
- Location: Republic of Texas
Post
by Halberds »
I think they are rather nice indeed.
Jolly well done.
-
William Frisbee
- Archive Member
- Posts: 2465
- Joined: Thu Jul 18, 2002 1:01 am
- Location: Live Free or Die
Post
by William Frisbee »
nice work as usual luciusj!
Keep up the fine work
-
Alcyoneus
- Archive Member
- Posts: 27097
- Joined: Thu Aug 17, 2000 1:01 am
- Location: Wichita, KS USA
Post
by Alcyoneus »
The cones tended to be more almong shaped, and the depth varied.