For Sale: Large lot of armour

madmailer · Post by **madmailer** » Tue Dec 30, 2008 3:42 pm

Hello, my new years resilution is to get ride of all the armour that has been cluttering up my garage and stick with just a few pieces. The prices are just a staring point, I will concider all reasonable offers, given the hard economic times.

Frist is a rivited mailshirt. It's made from flat ring and is galvinized so it's really bright. It will fit up to a 50" chest and is 32" long. $375

http://www.flickr.com/photos/32500316@N08/3133741835/
http://www.flickr.com/photos/32500316@N08/3133742633/

Next are a partly done set of 14th century arms. They are made up of a set of 16ga. stainless steel spaulders, 18ga. rebracers and vambracers and 16 ga. elbow cops. None of it is attached and the 18ga. parts need finishing and straps. $50

http://www.flickr.com/photos/32500316@N08/3107186928/
http://www.flickr.com/photos/32500316@N08/3106350957/

Clamshell gauntlets. These are 16ga. coldrold steel and are straped.
$120

http://www.flickr.com/photos/32500316@N08/3107185894/
http://www.flickr.com/photos/32500316@N08/3106354941/

18 ga. lamellar plates for Birka chest. Approx. 120 1 1/2" X 3 1/2 plates.
$125

http://www.flickr.com/photos/32500316@N08/3106352809/
http://www.flickr.com/photos/32500316@N08/3107183646/

Churburg style chest plates. These are 16ga. stainless steel. There are the 3 front plates and 5 wrap plates. These are the plates only, not attached. $100

http://www.flickr.com/photos/32500316@N08/3029967687/
http://www.flickr.com/photos/32500316@N08/3030804516/

Vary simple plackart. 18ga steel. 14 inch coverage. $ Best Offer

http://www.flickr.com/photos/32500316@N08/3030801732/

Get Dreesed For Battle Houndskull bassinet. 14 ga. it has some flaws with the visor hinge placement. To get it to fit correctly they will have to be moved. $140

http://www.flickr.com/photos/32500316@N08/3107181346/
http://www.flickr.com/photos/32500316@N08/3107182184/
http://www.flickr.com/photos/32500316@N ... otostream/
http://www.flickr.com/photos/32500316@N08/3107181622/

Raynold of Wharram · Post by **Raynold of Wharram** » Tue Dec 30, 2008 4:19 pm

I am interested in the Churburg plates. Do you have dome dimensions, like roughly what diameter they are going to be when assembled. Also might be interesting in the guantlets depending on what I hear from another inquirey I have here on the AA - what is the width across the palm?

Thanks,

Klaus the Red · Post by **Klaus the Red** » Tue Dec 30, 2008 6:46 pm

GDFB no longer has the bascinet on their web site- can you post some additional pics showing good views of the visor? Also, what are the interior dimensions of the helmet- side to side, front to back, and inner circumference?

K

Luca Sogliano · Post by **Luca Sogliano** » Tue Dec 30, 2008 7:00 pm

Can I get some measurements on those gauntlets?

madmailer · Post by **madmailer** » Wed Dec 31, 2008 12:38 am

OK For some reason AA isn't updating my message nbox. I get the email that there is a message but there not showing up in my box so all questions should be emailed to stuffformybox@hotmail.com until I can get this sorted out.

madmailer · Post by **madmailer** » Thu Jan 01, 2009 5:05 pm

Bump.

madmailer · Post by **madmailer** » Thu Jan 01, 2009 5:05 pm

Bump.

madmailer · Post by **madmailer** » Sat Jan 03, 2009 4:25 pm

Angusm0628 · Post by **Angusm0628** » Sat Jan 03, 2009 4:38 pm

I soooo want that riveted maile. but auto repairs are going to thwart my purpose..

Dallan of the Loch · Post by **Dallan of the Loch** » Sun Jan 04, 2009 11:38 am

If the mail shirt hasnt sold I'd like to put my name on it. Same thing with the chamburg plates if the other person falls through. Just want to check with my knight, Sir Alexis, to see if he will give his mark of approval.

Dallan

Dallan of the Loch · Post by **Dallan of the Loch** » Sun Jan 04, 2009 7:49 pm

Ran over and checked my chest measurement with Alexis, 43.5 inches and some change. With a padded gameson add another 2"s or so. That makes my chest measurement a 46" or 47'. The question is whether the 50" measure is a tight fit or not.

madmailer · Post by **madmailer** » Mon Jan 05, 2009 6:39 am

The folks I bought the shirt from on ebay say it's a 54" chest but it's closer to a 50 since thats my dads chest size and when he tryed in on me and my brother had to peel it off him(but he's also 50 and overwight). But on me, I have about a 45 " chest with my gambison and there is still anough slack to get in on and off myself. It's a vary thick weeve compared to other makers and probably heavier.

chaosclyve · Post by **chaosclyve** » Mon Jan 05, 2009 7:45 am

I am interested in the helm, what size is it? Thanks.

Dallan of the Loch · Post by **Dallan of the Loch** » Mon Jan 05, 2009 8:31 pm

Any info on the gauntlets?

madmailer · Post by **madmailer** » Mon Jan 05, 2009 8:41 pm

There made, or at least sold by SteelMastery who sell mostly on ebay. There 16ga. cold rolled steel, 4" accross the palm, 3 1/4 across the wrist and 9 inches from the top of the wrist to the finger tips.

madmailer · Post by **madmailer** » Sat Jan 10, 2009 6:32 pm

bump.

Kel Rekuta · Post by **Kel Rekuta** » Sat Jan 10, 2009 7:54 pm

I'm interested in the mail. I'm just down the road from you, so can pick it up, cash in hand. Let me know if its still available.

Kel

madmailer · Post by **madmailer** » Sat Jan 10, 2009 8:35 pm

pm. sent.

RaccoonRough · Post by **RaccoonRough** » Sat Jan 10, 2009 10:03 pm

I am interested in the arms/spaulders.

PM sent

For Sale: Large lot of armour

For Sale: Large lot of armour

chuburg plates and guantlets

Calling Dibs

Checked armor

And the gauntlets?

gauntlets.